NM CID GS-24 Practice Questions - New Mexico CID GS-24 Structural Steel Erection Examination Exam

Access More Questions

A 42 ft steel bay will receive individual (not panelized) K-series joists. Which attachment planning statement is correct?

Seats must be fabricated for field bolting, and the joists shall be field-bolted unless constructibility does not allow; each joist still needs the K-series two-bolt or equivalent weld at each end Because the bay is over 40 ft, welds are prohibited and four 1 in. bolts are required at each seat Field bolting is required only if the joists exceed 60 ft No seat fasteners are required until after erection bridging is complete

Correct Answer:

Seats must be fabricated for field bolting, and the joists shall be field-bolted unless constructibility does not allow; each joist still needs the K-series two-bolt or equivalent weld at each end

Access more questions from this quiz

Continue to NM CID GS-24 Practice Questions - New Mexico CID GS-24 Structural Steel Erection Examination Exam for more practice questions and the full quiz experience.

Access More Questions