NM CID GS-24 Practice Questions - New Mexico CID GS-24 Structural Steel Erection Examination Exam - NM CID GS-24 Practice Questions - New Mexico CID GS-24 Structural Steel Erection Examination Exam

Question 1

On an erection drawing, what does the designation W16×36 identify?

A wide-flange beam about 16 in. deep that weighs 36 lb per linear foot A 16 ft long beam that weighs 36 lb total A plate 16 in. wide by 36 in. long A 16 in. deep channel that weighs 36 kg per meter

Correct Answer:

A wide-flange beam about 16 in. deep that weighs 36 lb per linear foot

Question 2

What is the standard trade weight of a 1 in. thick carbon-steel plate per square foot?

490 lb/sq ft 40.8 lb/sq ft 20.4 lb/sq ft 12.5 lb/sq ft

Correct Answer:

40.8 lb/sq ft

Question 3

A W16×36 beam is 40 ft long. What is its theoretical piece weight before fittings?

640 lb 1,600 lb 1,440 lb 3,600 lb

Correct Answer:

1,440 lb

Question 4

Estimate the weight of a 1/2 in. thick steel plate that is 4 ft wide by 8 ft long.

327 lb 1,306 lb 490 lb 653 lb

Correct Answer:

653 lb

Question 5

What unit weight do erectors use for carbon structural steel when converting volume to pounds?

490 lb/cu ft 150 lb/cu ft 40.8 lb/cu ft 62.4 lb/cu ft

Correct Answer:

490 lb/cu ft

Question 1 of 100

Exam overview

About this Exam

Prepare with the NM CID GS-24 Practice Questions - New Mexico CID GS-24 Structural Steel Erection Examination Exam practice quiz. This question bank includes 100 questions covering steel, erection, joist, weight, and sling. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

NM CID GS-24 Practice Questions - New Mexico CID GS-24 Structural Steel Erection Examination Exam

This practice set contains 100 questions from the matching question bank and focuses on steel, erection, joist, weight, and sling. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

There are currently 100 available practice questions in this quiz.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Keep studying

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

NM CID GS-24 Practice Questions - New Mexico CID GS-24 Structural Steel Erection Examination Exam

Frequently Asked Questions

Related Questions

Ultimate Architect Registration Examination ARE Practice Exam

AAPD Qualifying Examination QE Practice Exam

Objective Structured Clinical Examination (OSCE) Practice Exam

CDCA Objective Structured Clinical Examination (OSCE) Practice Exam

SCE) Practice ExCDCA Objective Structured Clinical Examination (Oam

Colorado Motor Vehicle Salesperson Mastery Examination Practice