Colorado Hunters Safety Practice Test 2026 Complete 50 Questions

COLORADO HUNTERS

SAFETY PRACTICE TEST

2026 COMPLETE 50

QUESTIONS

Question 1: When handling any �rearm, what should a hunter do �rst and continuously?

Choices:

1) Keep a round chambered so the �rearm is ready 2) Keep the safety switch on until after �ring 3) Keep the action closed to prevent dirt from entering 4) Keep the muzzle pointed in a safe direction

Correct Answer: Keep the muzzle pointed in a safe direction

Explanation: The muzzle should be controlled in a safe direction at all times. Mechanical safeties and other precautions are important, but muzzle control is the primary protection against an unintended discharge injuring someone.Page 1

Question 2: Which statement best re�ects the safe way to treat a �rearm whose condition is unknown?

Choices:

1) Assume it is unloaded if the safety is on 2) Open the action only after pointing it at the ground 3) Pull the trigger in a safe direction to test it 4) Treat it with the respect due a loaded �rearm

Correct Answer: Treat it with the respect due a loaded �rearm

Explanation: A core �rearm-safety rule is to treat every �rearm as if it is loaded. You should control the muzzle and personally verify the chamber and action rather than relying on assumptions or a mechanical safety.Question 3: Where should a hunter's trigger �nger normally be until the decision to shoot has been made?

Choices:

1) Resting lightly on the trigger 2) Wrapped around the front of the trigger guard 3) On the safety button 4) Outside the trigger guard

Correct Answer: Outside the trigger guard

Explanation: The trigger �nger should remain outside the trigger guard until the hunter is ready to shoot. This helps prevent an unintended discharge caused by a stumble, surprise, or involuntary hand movement.Page 2

Question 4: Before �ring at game, which check is essential in addition to identifying the animal?

Choices:

1) Con�rm that another hunter is close enough to help 2) Con�rm that the �rearm's safety is still engaged 3) Con�rm that the animal is facing directly toward you 4) Know what is in front of and beyond the target

Correct Answer: Know what is in front of and beyond the target

Explanation: A safe hunter must identify the target and know what lies in front of it and beyond it. A projectile may miss, pass through, or ricochet, so a safe background and backstop are essential.Question 5: Why should a hunter never rely on a �rearm's mechanical safety as the only safety measure?

Choices:

1) A safety can fail or be moved unintentionally 2) A safety makes the �rearm less accurate 3) A safety works only with rim�re ammunition 4) A safety prevents the action from opening after �ring

Correct Answer: A safety can fail or be moved unintentionally

Explanation: A safety is a mechanical device and can fail, wear, or be moved accidentally. Safe muzzle control, trigger-�nger discipline, and proper handling must be practiced whether the safety is on or o�.Page 3