TSSA EDM-A Exam Practice Questions - TSSA Elevating Device Mechanic Class A (EDM-A) Exam - TSSA EDM-A Exam Practice Questions - TSSA Elevating Device Mechanic Class A (EDM-A) Exam

Question 1

Under Section 17 of the Technical Standards and Safety Act, 2000, which of the following powers is granted to an inspector conducting an inspection of a regulated facility?

To modify the adopted ASME safety codes without consulting the director. To permanently revoke a mechanic's certificate of qualification on the spot. To issue financial fines directly to a building owner without a court order. To enter any premises at any reasonable time without a warrant to perform inspections.

Correct Answer:

To enter any premises at any reasonable time without a warrant to perform inspections.

Question 2

According to Ontario Regulation 209/01 (Elevating Devices), when an accident occurs that results in death or serious injury, how must the incident be reported to the TSSA?

During the next scheduled annual inspection. By written notice within 7 days. Immediately by telephone. By written notice within 24 hours.

Correct Answer:

Immediately by telephone.

Question 3

Under O. Reg. 209/01, if a mechanic performs a major alteration on an elevating device, when must the device be inspected and returned to service?

The device can be returned to service immediately, provided a TSSA inspection is scheduled within 30 days. The device must be kept out of service for a mandatory 14-day observation period before public use. The device can be returned to service as long as a registered contractor signs off, with no TSSA notification required. The device must be inspected by a TSSA inspector and registered before it is returned to service.

Correct Answer:

The device must be inspected by a TSSA inspector and registered before it is returned to service.

Question 4

What is the restriction on an Elevating Device Mechanic-In-Training (EDM-T) certificate holder performing tasks on elevating devices?

They can work unsupervised on hydraulic elevators but require supervision on traction elevators. They can perform routine maintenance unsupervised but require supervision for alterations. They must always work under the direct supervision of a mechanic holding the appropriate class of certificate. They can work unsupervised after completing their first 2,000 hours of apprenticeship.

Correct Answer:

They must always work under the direct supervision of a mechanic holding the appropriate class of certificate.

Question 5

Where must the maintenance logbook for an elevating device be kept according to O. Reg. 209/01?

At the main office of the registered elevator contractor. With the building manager at the front desk of the facility. In a secure, locked box located at the main electrical entrance of the building. In the machine room, machine space, control room, or control space of the device.

Correct Answer:

In the machine room, machine space, control room, or control space of the device.

Question 1

Exam overview

About this Exam

Prepare with the TSSA EDM-A Exam Practice Questions - TSSA Elevating Device Mechanic Class A (EDM-A) Exam practice quiz. This question bank includes 100 questions covering elevator, safety, coil, elevating, and device. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

TSSA EDM-A Exam Practice Questions - TSSA Elevating Device Mechanic Class A (EDM-A) Exam

This practice set contains 100 questions from the matching question bank and focuses on elevator, safety, coil, elevating, and device. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Keep studying

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

TSSA EDM-A Exam Practice Questions - TSSA Elevating Device Mechanic Class A (EDM-A) Exam

Frequently Asked Questions

Related Questions

2nd Class Power Engineering (2A1) Practice Exam

2nd Class Power Engineering 2A3 Practice Exam

2nd Class Power Engineering (2B1) Practice Exam

2nd Class Power Engineering 2B2 Practice Exam

2nd Class Power Engineering 2B3 Practice Exam

2nd Class Power Engineering 2A2 Practice Exam Guide