Blending two streams to reach a single, controlled temperature is what a mixing valve does in a hydronic system. It takes hot supply water and cooler return water, and, using a thermostatic element or actuator, meters the proportion of each so the output reaches a setpoint. This is crucial for radiant heating and other circuits that need temperatures lower than the boiler’s outlet to protect piping and optimize comfort, while still delivering a consistent temperature to the rest of the system. The valve typically has three ports: hot input, cold/return input, and a mixed output to the loop, and it automatically adjusts the mix as conditions change to maintain the target temperature. A diverter valve, by contrast, only directs flow to one path or another without mixing temperatures, so it won’t produce a single controlled output temperature. A redundant gas valve is a safety component on the gas supply and has nothing to do with mixing water. A flame rectification system pertains to ignition and flame sensing in gas burners, not hydronic temperature blending.