Dassault Systèmes SOLIDWORKS Certification Exam

Question 1

In SolidWorks Print3D, which factor most directly determines how much support material a printed part will require?

The number of configurations in the part file The build orientation and the overhang angle threshold The material appearance assigned in the Appearance Manager The number of bodies in a multibody part

Correct Answer:

The build orientation and the overhang angle threshold

Question 2

Which file format is the original industry-standard output from SolidWorks for sharing a 3D model with most FDM, SLA, and SLS printers?

.STEP (ISO 10303) .STL (stereolithography) .DXF (Drawing Exchange Format) .IGES (Initial Graphics Exchange Specification)

Correct Answer:

.STL (stereolithography)

Question 3

When exporting an STL from SolidWorks, what do the 'Resolution' or 'Deviation/Angle' settings control?

The number of print layers the slicer will generate The coarseness or fineness of the triangular mesh that approximates curved surfaces The wall thickness of hollow infill regions The coordinate system origin used by the printer

Correct Answer:

The coarseness or fineness of the triangular mesh that approximates curved surfaces

Question 4

The 3MF file format, supported in SolidWorks Print3D, offers which key advantage over STL for 3D printing workflows?

It compresses the model to under 1 KB for fast network transfer It embeds color, material, texture, and print settings data alongside geometry It is the only format compatible with metal powder-bed fusion printers It stores the model as NURBS curves rather than facets, preserving exact curvature

Correct Answer:

It embeds color, material, texture, and print settings data alongside geometry

Question 5

In SolidWorks Print3D, what does the 'Wall Thickness Analysis' (or the similar check in the Geometry Analysis tool) help a designer identify?

Areas where the model wall is too thin to be reliably printed with the chosen process and material Surfaces that require a fillet to pass simulation boundary conditions Interference between bodies in a multibody part before assembly Draft angle violations that would trap the part in a mold

Correct Answer:

Areas where the model wall is too thin to be reliably printed with the chosen process and material

Exam overview

About this Exam

Prepare with the Dassault Systèmes SOLIDWORKS Certification Exam practice quiz. This question bank includes 45 questions covering solidworks, feature, part, assembly, and mold. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

Dassault Systèmes SOLIDWORKS Certification Exam

This practice set contains 45 questions from the matching question bank and focuses on solidworks, feature, part, assembly, and mold. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

Dassault Systèmes SOLIDWORKS Certification Exam

Frequently Asked Questions

Related Questions

2026 FFM Agent Broker Certification Practice Exam

3CX Academy Advanced Certification Practice Exam

3CX Academy Basic Certification Practice Exam

3CX Intermediate Certification Practice Exam

Ultimate Study Guide for the Argus Certification Practice Test

Arizona Caregiver Certification Practice Exam