AWS CRAW Practice Questions - AWS Certified Robotic Arc Welding (CRAW) Exam - Variant 2 - AWS CRAW Practice Questions - AWS Certified Robotic Arc Welding (CRAW) Exam

Question 1

During setup for a robotic GMAW cell, the wire repeatedly slips in the feeder before reaching the contact tip. What should be checked first?

Whether drive-roll groove type and tension match the electrode size and type Whether the robot base bolts were painted Whether the part program uses joint interpolation Whether the shielding gas cylinder is the same color as the last job

Correct Answer:

Whether drive-roll groove type and tension match the electrode size and type

Question 2

A robotic weld develops scattered porosity immediately after a gas bottle change. Which setup check is most relevant?

Increase travel speed to outrun contamination Verify shielding gas type, flow setting, hoses, and leaks Disable crater-fill logic Move the robot home position closer to the fixture

Correct Answer:

Verify shielding gas type, flow setting, hoses, and leaks

Question 3

A cell runs acceptably at the start of shift, but arc starts become erratic after heavy spatter builds inside the nozzle. What maintenance action is most appropriate?

Edit all taught points by 2 mm in the work frame Clean or replace the nozzle and inspect the contact tip and diffuser Reduce the safety-rated stop category Change the robot payload setting to zero

Correct Answer:

Clean or replace the nozzle and inspect the contact tip and diffuser

Question 4

After a torch collision, the same program now welds consistently high on every lap joint. What setup condition should be verified before editing each weld point?

The TCP and torch alignment relative to the tool mount The operator login password length The file name used for the backup program The brand of welding gloves used by the technician

Correct Answer:

The TCP and torch alignment relative to the tool mount

Question 5

A robot reaches the start point and wire feeds, but the arc fails to initiate intermittently. Which equipment setup check is most directly tied to arc initiation?

Verify work-lead connection, power-source enable signals, and start parameters Check whether the robot pendant language is English Add more air pressure to the fixture clamps Delete the dry-run version of the program

Correct Answer:

Verify work-lead connection, power-source enable signals, and start parameters

Exam overview

About this Exam

Prepare with the AWS CRAW Practice Questions - AWS Certified Robotic Arc Welding (CRAW) Exam - Variant 2 practice quiz. This question bank includes 100 questions covering robotic, weld, cell, welding, and gmaw. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

AWS CRAW Practice Questions - AWS Certified Robotic Arc Welding (CRAW) Exam - Variant 2

This practice set contains 100 questions from the matching question bank and focuses on robotic, weld, cell, welding, and gmaw. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

AWS CRAW Practice Questions - AWS Certified Robotic Arc Welding (CRAW) Exam - Variant 2

Frequently Asked Questions

Related Questions

ISC2 Certified in Cybersecurity Practice Exam

12N Crawler Tractor Practice Exam

Arizona CNA Certified Nursing Assistant Practice Exam

Certified Professional Public Buyer (CPPB) Practice Exam

Certified Specialist Business Intelligence (CSBI) Practice Test

Certified Specialist In Renal Nutrition (CSR) Practice Exam