A non-permit confined space is a confined space that does not have the characteristics that would classify it as permit-required. It may still have limited entry or exit, but it does not contain or have the potential to contain a hazardous atmosphere, an engulfment hazard, or any other serious condition that would trigger a permit. Because those hazards are absent, no permit is required to enter. This makes the statement describing a confined space without the characteristics of a permit-required confined space the best fit. The other ideas—requiring a permit, being always hazardous, or having no ingress/egress restrictions—do not match how OSHA defines non-permit confined spaces.

The anchor point for fall protection must be able to withstand a minimum of 5,000 pounds for each employee attached. This requirement accounts for the dynamic forces generated when a fall is arrested, ensuring the anchor won’t fail and the safety system can function properly. If more than one worker is connected to the same anchor, the anchor must be capable of supporting the combined load (5,000 pounds per person). The other options do not meet this OSHA-stated minimum, so they would not be considered safe or compliant for typical fall-arrest setups.

OSHA requires containers used for flammable liquids to be specifically approved for such use and to be kept closed when not in use. Approved canisters and portable tanks meet this requirement because they’re designed and tested to safely contain flammable liquids and control vapors. Open pails are not allowed since they remain exposed, increasing vapor release and ignition risk. Plastic bags are not suitable because they aren’t rated for flammable liquids and can leak, rupture, or fail to contain vapors. So, the only acceptable options are approved canisters and portable tanks.

In switching operations, re-energizing safely means energizing only after you have confirmed the circuit is isolated from all energy sources and you have followed the documented switching procedure. Verifying isolation ensures there is no remaining energy that could surprise you during energization—this includes ensuring disconnects are in the correct position, energy sources are blocked, and any stored energy is released or secured. Following the approved procedure guarantees the exact sequence and responsibilities are followed, so the equipment is returned to service in a known, safe state. This combination minimizes the risk of shock, arc flash, or equipment damage. Resuming service immediately, or relying only on hazards being addressed or supervisor approval, does not guarantee that isolation has been verified or that the steps are being executed in the proper order.