Register
Question 1
Where should the relief vent be added on a bank of eight lavatories?
Correct Answer:
At the most downstream circuit vented fixture
Explanation:
When multiple lavatories drain into a common line, traps can siphon if the downstream flow creates a vacuum. A relief vent supplies air to the drain to break that vacuum as the fixtures drain. Placing the relief vent at the farthest downstream fixture in the vented circuit ensures air can move back along the entire run, protecting every trap along the bank. If you put the vent elsewhere, parts of the run might not receive sufficient air to prevent siphonage. So the best placement is at the most downstream fixture that is part of the vented circuit.
Question 2
Copper losses in a transformer are caused by winding resistance.
Correct Answer:
Winding resistance
Explanation:
Copper losses come from the resistance of the windings. When current flows through the winding copper, its finite resistance dissipates power as heat, described by P = I^2 R. This loss is localized in the windings and is what we call copper loss. Core losses, in contrast, arise from the magnetic core material—hysteresis and eddy currents—and occur in the core, not the windings. Magnetic saturation is about the core’s flux limit, not a direct loss mechanism, and cooling affects how heat is removed rather than creating the loss itself. So the winding resistance is the source of copper losses.
Question 3
State the standard domestic supply in Australia.
Correct Answer:
230 V nominal, 50 Hz.
Explanation:
Australia’s standard domestic supply is 230 V nominal, 50 Hz. This means the voltage between live and neutral is about 230 volts RMS, and the system operates at 50 cycles per second. Appliances are designed to work within this range, and the frequency of 50 Hz keeps motors and timing devices running consistently across the country. The other figures refer to different electrical systems: 240 V at 60 Hz would align with some regions outside Australia, 110 V at 60 Hz is typical of North American systems, and 400 V at 50 Hz indicates a three-phase industrial supply rather than a standard home supply.
Question 4
Core losses in transformers are comprised of hysteresis and eddy currents.
Correct Answer:
True
Explanation:
Core losses in transformers consist of two mechanisms: hysteresis losses and eddy current losses. Hysteresis losses come from the magnetic domains in the core material not aligning instantly with the changing magnetic field as the AC waveform cycles, so energy is dissipated as heat with each cycle. Eddy current losses arise because the changing magnetic flux induces circulating currents in the conductive core, and these currents also heat the material. The total core loss is the sum of these two components, while copper losses come from the resistance of the windings and are separate from core losses. Therefore, the statement is true.
Question 5
Spacing for gang showers?
Correct Answer:
750 mm / 30 inches
Explanation:
Spacing between adjacent gang showers must allow safe access to each unit and prevent spray from one shower from interfering with the next. The standard spacing is 750 mm (about 30 inches) from center to center. This provides enough room for a person to stand in front of a shower, reach the controls, and move to safety without crowding the neighboring unit, while also reducing the chance of water impacting the adjacent shower area. Spacing smaller than this, like 600 mm (24 inches) or 500 mm (20 inches), tends to be too tight for comfortable and safe operation. A larger gap, such as 900 mm (36 inches), uses more space than typically required for most layouts.
Question 1
Exam overview

About this Exam

Prepare with the 3rd Year Electrical Trades Qualification (TQ) Practice Exam practice quiz. This question bank includes 10 questions covering lavatories, losses, domestic, year, and electrical. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

3rd Year Electrical Trades Qualification (TQ) Practice Exam

This practice set contains 10 questions from the matching question bank and focuses on lavatories, losses, domestic, year, and electrical. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.
No fixed duration is currently configured for this quiz.
Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.
Yes. You can retake the practice test again as you continue studying during your available access period.
After your access is confirmed, you can continue into the complete practice exam from this quiz flow.
Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.
Keep studying

Related Questions

2nd Year Lineman Apprentice Practice Exam

0 min

3A Electrical Practice Test & Study Guide

0 min

3rd Year Lineman Apprentice Practice Exam

0 min

4th Year Lineman Apprentice Practice Exam Guide

0 min

4th Year Plumbing TQ Practice Exam

0 min

ABYC Advanced Electrical Practice Exam

0 min