Question 1
A two-leg wire rope bridle is rigged to suspend a central hoist point supporting a static point load of 8 kN. The bridle legs are symmetrical, and the included angle between the two legs at the apex is 60° (each leg forms an angle of 30° to the vertical). Ignoring the self-weight of the rigging hardware, what is the tension force in each bridle leg?
Correct Answer:
4.62 kN
Question 2
Purpose-built event-technology attachment equipment (Anschlagmittel) used to hold loads above persons — the category described in DGUV Information 215-313 'Lasten über Personen', which Swiss stage and event practice follows — must carry a clear marking of a specific operating coefficient (Betriebskoeffizient). Which value is it?
Correct Answer:
A working coefficient of 10 against the minimum breaking force (Mindestbruchkraft)
Question 3
A 12-meter standard aluminum square truss (4-point truss, EN AW-6082 T6) is simply supported at both ends on two chain hoists. The manufacturer load table indicates an allowable center point load (CPL) of 600 kg and an allowable uniformly distributed load (UDL) of 1,200 kg (100 kg/m). If a lighting technician installs a uniformly distributed load of 600 kg (50 kg/m) across the full span, what is the remaining allowable single point load that can be placed exactly at mid-span?
Correct Answer:
300 kg
Question 4
According to the SQ P2 standard for electric chain hoists in event technology, what is the primary operational difference between a D8 Plus hoist and a standard D8 hoist?
Correct Answer:
A D8 Plus hoist features a secondary independent mechanical brake and a higher safety factor (8:1 or 10:1), allowing loads to remain suspended above people without secondary safety bonding
Question 5
When securing a steel wire rope termination using U-bolt wire rope grips (Drahtseilklemmen according to DIN EN 13411-5) on temporary stage installations, which mounting rule is mandatory to prevent crushing and weakening the load-bearing line?
Correct Answer:
The bridge (saddle) of the clamp must always be placed on the live load-bearing rope, while the U-bolt sits on the dead rope end ('Never saddle a dead horse')
Question 1
Exam overview

About this Exam

Prepare with the Veranstaltungstechniker FA Practice Questions - Veranstaltungstechnikerin Veranstaltungstechniker mit eidgenössischem Fachausweis Exam practice quiz. This question bank includes 100 questions covering stage, standard, swiss, load, and safety. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

Veranstaltungstechniker FA Practice Questions - Veranstaltungstechnikerin Veranstaltungstechniker mit eidgenössischem Fachausweis Exam

This practice set contains 100 questions from the matching question bank and focuses on stage, standard, swiss, load, and safety. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.
No fixed duration is currently configured for this quiz.
Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.
Yes. You can retake the practice test again as you continue studying during your available access period.
After your access is confirmed, you can continue into the complete practice exam from this quiz flow.
Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.
Keep studying

Related Questions