SVP Industrial Electrician Practice Questions - Saudi Skill Verification Program - Industrial Electrician (Saudi Arabia) Exam - SVP Industrial Electrician Practice Questions - Saudi Skill Verification Program - Industrial Electrician (Saudi Arabia) Exam

Question 1

What is the standard procedure for the three-point testing method used to verify a circuit is fully de-energized before beginning work?

Test the voltmeter on a known energized source, test the target circuit, and then re-test the voltmeter on the known energized source. Test the circuit breaker, check the main disconnect handle, and verify the ground connection is intact. Check the target circuit for voltage, ground the neutral conductor, and lock out the main enclosure handle. Measure voltage phase-to-phase, measure voltage phase-to-ground, and measure resistance across the main contactor.

Correct Answer:

Test the voltmeter on a known energized source, test the target circuit, and then re-test the voltmeter on the known energized source.

Question 2

Under Saudi Electrical Code (SBC 401) and international standards, what is the standard color coding for a three-phase low-voltage system?

Phase 1: Brown, Phase 2: Black, Phase 3: Grey, Neutral: Blue, Protective Earth: Green-Yellow Phase 1: Red, Phase 2: Yellow, Phase 3: Blue, Neutral: Black, Protective Earth: Green Phase 1: Black, Phase 2: Red, Phase 3: Blue, Neutral: White, Protective Earth: Bare Copper Phase 1: Yellow, Phase 2: Green, Phase 3: Red, Neutral: Grey, Protective Earth: White

Correct Answer:

Phase 1: Brown, Phase 2: Black, Phase 3: Grey, Neutral: Blue, Protective Earth: Green-Yellow

Question 3

According to OSHA and NFPA 70E, what is the definition of the 'Limited Approach Boundary' for electrical shock protection?

The closest distance an unqualified person may approach live, exposed electrical conductors or circuit parts unless accompanied by a qualified person. The distance from exposed live parts within which there is an increased risk of electric arc flash injury. The boundary where only qualified persons wearing full arc-flash PPE are permitted to cross to perform work. The physical space within which a shock hazard exists and only insulated tools may be introduced.

Correct Answer:

The closest distance an unqualified person may approach live, exposed electrical conductors or circuit parts unless accompanied by a qualified person.

Question 4

Which of the following is a mandatory requirement for a lock used in a Lockout/Tagout (LOTO) safety procedure?

It must be uniquely keyed, standardized in color or shape, and identify the specific person who applied it. It must be made of brass or bronze to prevent spark generation in all environments. It must be designed to be cut easily with bolt cutters in case of an emergency shift change. It must have a master key kept in the main safety supervisor's office for immediate override.

Correct Answer:

It must be uniquely keyed, standardized in color or shape, and identify the specific person who applied it.

Question 5

What class of arc-rated personal protective equipment (PPE) is required for tasks where the estimated incident energy exposure exceeds 40 cal/cm²?

Work must not be performed live; de-energization is mandatory because the NFPA 70E PPE-category method stops at 40 cal/cm² and the blast/pressure hazard above it makes energized work unjustifiable. PPE Category 4 (minimum arc rating of 40 cal/cm²). PPE Category 5 (minimum arc rating of 50 cal/cm²). Heavy-duty double-layered leather welding jackets and carbon-fiber face shields.

Correct Answer:

Work must not be performed live; de-energization is mandatory because the NFPA 70E PPE-category method stops at 40 cal/cm² and the blast/pressure hazard above it makes energized work unjustifiable.

Question 1

Exam overview

About this Exam

Prepare with the SVP Industrial Electrician Practice Questions - Saudi Skill Verification Program - Industrial Electrician (Saudi Arabia) Exam practice quiz. This question bank includes 100 questions covering industrial, electrical, motor, primary, and conduit. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

SVP Industrial Electrician Practice Questions - Saudi Skill Verification Program - Industrial Electrician (Saudi Arabia) Exam

This practice set contains 100 questions from the matching question bank and focuses on industrial, electrical, motor, primary, and conduit. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Keep studying

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

SVP Industrial Electrician Practice Questions - Saudi Skill Verification Program - Industrial Electrician (Saudi Arabia) Exam

Frequently Asked Questions

Related Questions

18B Mortars Skills Practice Exam

340B Program Operations Certificate Practice Exam

4-H Livestock Skillathon Practice Exam

ARE 5.0 Programming and Analysis Practice Exam

Chicago Supervising Electrician Practice Exam

CDFA Measurement Verification Practice Exam