NV C-14A Reinforcing Steel Practice Questions - Nevada C-14A Reinforcing Steel Contractor Examination Exam - NV C-14A Reinforcing Steel Practice Questions - Nevada C-14A Reinforcing Steel Contractor Examination Exam

Question 1

Under NAC 624.310, what work is authorized by a Nevada C-14A Reinforcing Steel license?

Fabrication, placement and tying of steel reinforcing bars (rods), and post-tensioning to reinforce concrete buildings and structures Erection of structural steel shapes, plates, joists, and metal deck Installation of ornamental metals, storefronts, and curtain wall Placement of ready-mix concrete, formwork, and finishing

Correct Answer:

Fabrication, placement and tying of steel reinforcing bars (rods), and post-tensioning to reinforce concrete buildings and structures

Question 2

What is an unbonded monostrand post-tensioning tendon?

A grouted multi-strand duct stressed before the concrete is placed A mild-steel #5 reinforcing bar that is greased so it will not rust A seven-wire prestressing strand coated with P-T coating and sheathed so it can move inside the concrete when stressed A welded-wire sheet used as temperature steel in a slab-on-grade

Correct Answer:

A seven-wire prestressing strand coated with P-T coating and sheathed so it can move inside the concrete when stressed

Question 3

What is the usual strand for U.S. unbonded slab post-tensioning?

No. 9 smooth bar, Grade 250 3/8-inch Grade 40 deformed rebar 1-inch diameter A615 Grade 75 bar 1/2-inch, seven-wire, Grade 270 low-relaxation strand

Correct Answer:

1/2-inch, seven-wire, Grade 270 low-relaxation strand

Question 4

What is the primary purpose of the extruded plastic sheathing on an unbonded tendon?

To bond the strand to the concrete along its full length To keep the P-T coating in place, protect the strand from corrosion, and let the strand slide during stressing To replace the need for concrete cover over the tendon To increase the strand's breaking strength from 270 ksi to 300 ksi

Correct Answer:

To keep the P-T coating in place, protect the strand from corrosion, and let the strand slide during stressing

Question 5

When is an encapsulated unbonded PT system required instead of a standard (non-encapsulated) system?

In aggressive environments such as deicing salts, seawater, or other conditions specified by the engineer On every interior dry office slab, regardless of exposure Only when the strand is Grade 250 instead of Grade 270 Only when tendons will be stressed from both ends

Correct Answer:

In aggressive environments such as deicing salts, seawater, or other conditions specified by the engineer

Exam overview

About this Exam

Prepare with the NV C-14A Reinforcing Steel Practice Questions - Nevada C-14A Reinforcing Steel Contractor Examination Exam practice quiz. This question bank includes 100 questions covering unbonded, tendon, crsi, stressing, and slab. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

NV C-14A Reinforcing Steel Practice Questions - Nevada C-14A Reinforcing Steel Contractor Examination Exam

This practice set contains 100 questions from the matching question bank and focuses on unbonded, tendon, crsi, stressing, and slab. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

NV C-14A Reinforcing Steel Practice Questions - Nevada C-14A Reinforcing Steel Contractor Examination Exam

Frequently Asked Questions

Related Questions

Ultimate Architect Registration Examination ARE Practice Exam

Arizona Low Voltage Contractor Practice Exam

Arizona Low Voltage Contractor Exam

Arizona CR-39 HVAC Contractor Practice Exam

Arizona Registrar of Contractors (AZ ROC) Practice Exam

AAPD Qualifying Examination QE Practice Exam