MITO Light Auto L3 Practice Questions - NZ Certificate in Automotive Engineering (Light Vehicle, Level 3) Theory Assessment Exam - MITO Light Auto L3 Practice Questions - NZ Certificate in Automotive Engineering (Light Vehicle, Level 3) Theory Assessment Exam

Question 1

Under New Zealand's Health and Safety at Work Act 2015 (HSWA), who has the primary duty to ensure, so far as is reasonably practicable, that the health and safety of workers is not put at risk?

Persons Conducting a Business or Undertaking (PCBUs) such as the workshop employer Only the individual apprentice regardless of supervision NZTA vehicle inspectors during routine WoF checks Vehicle owners when dropping off cars for service

Correct Answer:

Persons Conducting a Business or Undertaking (PCBUs) such as the workshop employer

Question 2

Before lifting a light vehicle on a two-post hoist in a New Zealand workshop, what is the correct first step?

Confirm hoist capacity, inspect lift points, and position adapters on manufacturer-recommended jacking points Raise the vehicle immediately to maximum height to test hoist travel Place the hoist arms under the vehicle sills without checking the service manual Lift only from the front subframe regardless of vehicle design

Correct Answer:

Confirm hoist capacity, inspect lift points, and position adapters on manufacturer-recommended jacking points

Question 3

What does an SDS (Safety Data Sheet) provide for automotive chemicals used in a New Zealand workshop?

Hazard identification, safe handling, PPE requirements, and emergency measures for the substance The vehicle manufacturer's recommended service interval schedule NZTA WoF pass/fail criteria for brake efficiency Customer invoice pricing for supplied parts and labour

Correct Answer:

Hazard identification, safe handling, PPE requirements, and emergency measures for the substance

Question 4

When working underneath a vehicle supported on a hoist, which additional safety measure is considered best practice in New Zealand workshops?

Position axle stands or a mechanical safety lock as a secondary support Rely solely on the hydraulic hoist once the vehicle is at working height Place wheel chocks only on the side opposite the technician Disable the hoist electrical supply after every individual task

Correct Answer:

Position axle stands or a mechanical safety lock as a secondary support

Question 5

A technician is about to grind a rusted exhaust component. Which PPE combination is most appropriate?

Safety glasses or face shield, hearing protection, and gloves suitable for hot metal Standard prescription glasses and fabric gardening gloves Sunglasses and a disposable paper dust mask only No PPE is required if the grinder has a guard fitted

Correct Answer:

Safety glasses or face shield, hearing protection, and gloves suitable for hot metal

Exam overview

About this Exam

Prepare with the MITO Light Auto L3 Practice Questions - NZ Certificate in Automotive Engineering (Light Vehicle, Level 3) Theory Assessment Exam practice quiz. This question bank includes 100 questions covering engine, vehicle, zealand, workshop, and light. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

MITO Light Auto L3 Practice Questions - NZ Certificate in Automotive Engineering (Light Vehicle, Level 3) Theory Assessment Exam

This practice set contains 100 questions from the matching question bank and focuses on engine, vehicle, zealand, workshop, and light. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

MITO Light Auto L3 Practice Questions - NZ Certificate in Automotive Engineering (Light Vehicle, Level 3) Theory Assessment Exam

Frequently Asked Questions

Related Questions

120-Hour TESOL Certificate Practice Test

2nd Class Power Engineering (2A1) Practice Exam

2nd Class Power Engineering 2A3 Practice Exam

2nd Class Power Engineering (2B1) Practice Exam

2nd Class Power Engineering 2B2 Practice Exam

2nd Class Power Engineering 2B3 Practice Exam