Meisterprüfung Spengler Practice Questions - Meisterprüfung für das Handwerk Spengler (Austrian Master Craftsman Examination in Sheet Metal & Tinsmithing) Exam - Meisterprüfung Spengler Practice Questions - Meisterprüfung für das Handwerk Spengler (Austrian Master Craftsman Examination in Sheet Metal & Tinsmithing) Exam

Question 1

According to EN 988, what are the primary alloying elements added to high-purity zinc (min. 99.995% Zn, quality Z1) to produce titanium zinc (Titanzink) for tinsmithing applications, and what is their primary metallurgical function?

Titanium (0.08–1.0%) to increase creep resistance (Kriechfestigkeit) and Copper (0.06–0.2%) to increase tensile strength and hardness Lead (0.5–1.5%) to improve softness and Tin (0.2–0.8%) to lower the melting point for easy welding Aluminum (1.0–2.5%) to create a reflective oxide layer and Magnesium (0.5–1.0%) to prevent galvanic rust Silicon (0.1–0.3%) to improve fluidity and Nickel (0.05–0.15%) to increase electrical conductivity

Correct Answer:

Titanium (0.08–1.0%) to increase creep resistance (Kriechfestigkeit) and Copper (0.06–0.2%) to increase tensile strength and hardness

Question 2

When newly installed bright titanium zinc (walzblankes Titanzink) is exposed to the atmosphere, what multi-stage chemical reaction leads to the formation of its natural protective patina?

Zinc reacts directly with atmospheric nitrogen to form a ceramic-like zinc nitride (Zn3N2) passivation film Zinc reacts with atmospheric moisture to form zinc hydroxide (Zn(OH)2), which then reacts with atmospheric carbon dioxide (CO2) to form insoluble basic zinc carbonate (ZnCO3 · 2Zn(OH)2) Zinc reacts with sulfur dioxide to form water-soluble zinc sulfate (ZnSO4), which crystallizes permanently on the surface Zinc oxidizes with pure atmospheric oxygen into zinc peroxide (ZnO2), which prevents further electron transfer

Correct Answer:

Zinc reacts with atmospheric moisture to form zinc hydroxide (Zn(OH)2), which then reacts with atmospheric carbon dioxide (CO2) to form insoluble basic zinc carbonate (ZnCO3 · 2Zn(OH)2)

Question 3

According to ÖNORM B 3521 and EN 988 guidelines, what is the minimum permissible material temperature for folding, bending, and seaming titanium zinc on a construction site without preheating?

-5 °C (as long as folding machines are lubricated with oil) +0 °C (freezing point of water) +10 °C (material temperature; below which folding causes brittle micro-cracking / Sprödbruch unless preheated with warm air) +25 °C (room temperature required for all bending operations)

Correct Answer:

+10 °C (material temperature; below which folding causes brittle micro-cracking / Sprödbruch unless preheated with warm air)

Question 4

A master tinsmith is planning a 12.0-meter-long standing seam tray (Doppelstehfalzschar) made of copper (Cu-DHP). If the design temperature difference (Delta T) between winter frost (-10 °C) and summer solar radiation (+70 °C) is 80 K, and the linear thermal expansion coefficient for copper is alpha = 0.017 mm/(m·K), what is the calculated total longitudinal thermal expansion (Delta L)?

8.16 mm 24.48 mm 32.64 mm 16.32 mm

Correct Answer:

16.32 mm

Question 5

According to the practical electrochemical flow rule (Fließregel) in tinsmithing and roof drainage design, which of the following material combinations is strictly prohibited due to severe galvanic contact corrosion (Kontaktkorrosion / Lochfraß)?

Directing rainwater runoff from an upper copper roof covering (Kupfereindeckung) into lower titanium zinc gutters or galvanized steel downpipes Directing rainwater runoff from an upper titanium zinc roof into a lower copper gutter Directing rainwater runoff from an upper coated aluminum facade into a stainless steel box gutter Directing rainwater runoff from a glazed ceramic tile roof into a titanium zinc eaves gutter

Correct Answer:

Directing rainwater runoff from an upper copper roof covering (Kupfereindeckung) into lower titanium zinc gutters or galvanized steel downpipes

Question 1

Exam overview

About this Exam

Prepare with the Meisterprüfung Spengler Practice Questions - Meisterprüfung für das Handwerk Spengler (Austrian Master Craftsman Examination in Sheet Metal & Tinsmithing) Exam practice quiz. This question bank includes 100 questions covering norm, roof, seam, standing, and zinc. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

Meisterprüfung Spengler Practice Questions - Meisterprüfung für das Handwerk Spengler (Austrian Master Craftsman Examination in Sheet Metal & Tinsmithing) Exam

This practice set contains 100 questions from the matching question bank and focuses on norm, roof, seam, standing, and zinc. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Keep studying

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

Meisterprüfung Spengler Practice Questions - Meisterprüfung für das Handwerk Spengler (Austrian Master Craftsman Examination in Sheet Metal & Tinsmithing) Exam

Frequently Asked Questions

Related Questions

Master the 18B Anti-Tank AT Practice Exam

2026 Wellcare ACT Mastery Practice Exam

3F571 Administration Craftsman Practice Exam

3F571 Administration Craftsman Practice Exam.

Ultimate Architect Registration Examination ARE Practice Exam

Master the A Level Spanish Practice Exam