Question 1
In wood combustion physics, what is the fundamental difference between wood moisture content (Holzfeuchte u, dry basis) and wood water content (Wassergehalt w, wet basis), and what is the typical lower heating value (Heizwert H_u) of air-dried firewood with u = 20%?
Correct Answer:
Moisture content u relates water mass to dry wood mass (u = m_w / m_dry), whereas water content w relates water mass to total wet mass (w = m_w / m_total); air-dried wood with u = 20% (w ≈ 16.7%) has a lower heating value H_u ≈ 4.0 kWh/kg (approx. 14.4–14.7 MJ/kg).
Question 2
A customer requests a custom masonry tiled stove (Kachelgrundofen) with a nominal heat output P_n = 3.2 kW and a nominal heat storage duration (Speicherzeit) t_n = 12 h. Assuming standard dry beech wood (H_u = 4.0 kWh/kg) and the mandatory minimum efficiency η = 80% (0.80) per ÖNORM EN 15544, what fuel charge mass (Holzauflagemenge B) must be dimensioned?
Correct Answer:
12.0 kg
Question 3
What is the primary statutory purpose and regulatory scope of ÖNORM EN 15544 in Austrian stove-making practice?
Correct Answer:
It provides the standardized thermodynamic calculation procedure for individually site-built tiled and plastered masonry stoves (Kachelgrundöfen/Putzgrundöfen) to verify compliance with energy efficiency (≥ 80%) and emission limit values without requiring destructive laboratory type-testing.
Question 4
Under ÖNORM EN 15544, how is the minimum combustion chamber surface area (Feuerraum-Innenoberfläche A_OF) calculated as a function of the wood fuel charge mass B?
Correct Answer:
A_OF ≥ 900 * B^0.57 (with A_OF in cm² and B in kg)
Question 5
What are the three distinct sequential phases during the batch combustion (Abbrandzyklus) of log wood in a masonry tiled stove?
Correct Answer:
Drying and moisture evaporation (Entfeuchtung/Trocknung up to ~150°C), thermal pyrolysis and gasification (Pyrolyse/Entgasung at ~150–600°C releasing ~80–85% of mass as volatile gases), and charcoal burnout (Holzkohleausbrand at ~600–900°C).
Question 1
Exam overview

About this Exam

Prepare with the Meisterprüfung Hafner Practice Questions - Meisterprüfung Hafner (Austria) Exam practice quiz. This question bank includes 100 questions covering stove, chimney, norm, flue, and wood. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

Meisterprüfung Hafner Practice Questions - Meisterprüfung Hafner (Austria) Exam

This practice set contains 100 questions from the matching question bank and focuses on stove, chimney, norm, flue, and wood. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.
No fixed duration is currently configured for this quiz.
Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.
Yes. You can retake the practice test again as you continue studying during your available access period.
After your access is confirmed, you can continue into the complete practice exam from this quiz flow.
Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.
Keep studying

Related Questions