CTVET Ghana Certificate II - Plumbing Practice Questions - Commission for Technical and Vocational Education and Training Ghana Certificate II - Plumbing Exam - CTVET Ghana Certificate II - Plumbing Practice Questions - Commission for Technical and Vocational Education and Training Ghana Certificate II

Question 1

Under Section 39 of the Ghana Factories, Offices and Shops Act, 1970 (Act 328), which of the following is mandatory in a plumbing workshop where welding or soldering is performed?

Adequate ventilation to remove toxic fumes and gases from the breathing zone Air conditioning units running at a maximum temperature of 18 degrees Celsius A dry chemical fire extinguisher placed every three meters along the wall Soundproof insulation on all walls to reduce noise below 30 decibels

Correct Answer:

Adequate ventilation to remove toxic fumes and gases from the breathing zone

Question 2

What is the minimum personal protective equipment (PPE) required when using a blowtorch to solder a copper joint?

Safety glasses, heat-resistant leather gloves, and cotton clothing Face shield, rubber chemical gloves, and a synthetic nylon apron Dust mask, latex gloves, and steel-toe boots only Oxy-acetylene goggles, welding leather sleeves, and a respirator

Correct Answer:

Safety glasses, heat-resistant leather gloves, and cotton clothing

Question 3

How should empty PVC primer and solvent cement cans be disposed of on a Ghanaian construction site?

Collected and disposed of at a designated hazardous waste collection point Burned in an open fire pit on site to consume any remaining liquid residue Crushed and buried directly in the soil next to the plumbing trenches Rinsed with municipal water and disposed of with general organic waste

Correct Answer:

Collected and disposed of at a designated hazardous waste collection point

Question 4

A fire breaks out in a plumbing store containing solvent cement, polyurethane sealants, and cleaning solvents. Which class of fire is this, and which extinguisher is appropriate?

Class B fire; dry chemical powder or carbon dioxide (CO2) extinguisher Class A fire; pressurized water fire extinguisher Class C fire; wet chemical fire extinguisher Class D fire; metal powder dry agent extinguisher

Correct Answer:

Class B fire; dry chemical powder or carbon dioxide (CO2) extinguisher

Question 5

When cutting a galvanized iron (GI) pipe using an angle grinder, which safety hazard is most critical to control?

High-velocity metal sparks and flying fragments of the grinding disc Static electricity buildup on the pipe surface causing electrical shock A sudden loss of hydraulic pressure in the grinder tool handle Toxic gas emissions from the internal lead lining of the iron pipe

Correct Answer:

High-velocity metal sparks and flying fragments of the grinding disc

Exam overview

About this Exam

Prepare with the CTVET Ghana Certificate II - Plumbing Practice Questions - Commission for Technical and Vocational Education and Training Ghana Certificate II - Plumbing Exam practice quiz. This question bank includes 100 questions covering pipe, water, pipes, copper, and plumbing. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

CTVET Ghana Certificate II - Plumbing Practice Questions - Commission for Technical and Vocational Education and Training Ghana Certificate II - Plumbing Exam

This practice set contains 100 questions from the matching question bank and focuses on pipe, water, pipes, copper, and plumbing. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

CTVET Ghana Certificate II - Plumbing Practice Questions - Commission for Technical and Vocational Education and Training Ghana Certificate II - Plumbing Exam

Frequently Asked Questions

Related Questions

10-Hour Digital Training Course One Way Driving Ontario Practice Exam Prep Guide

120-Hour TESOL Certificate Practice Test

200 Hour Yoga Teacher Training Practice Exam

340B Program Operations Certificate Practice Exam

360 Training Food Handlers Practice Exam

360 Training Food Manager Practice Exam