CPCS A36 Lorry Loader (NOCN CPCS, UK) Practice Questions - CPCS A36 Lorry Loader Theory & Technical Test Exam - CPCS A36 Lorry Loader (NOCN CPCS, UK) Practice Questions - CPCS A36 Lorry Loader Theory & Technical Test Exam

Question 1

What is the primary function of a lorry loader crane installed on a commercial vehicle chassis?

To allow the host vehicle to load, transport, and unload goods independently without auxiliary crane support To increase the total gross vehicle weight (GVW) allowance of the host truck under UK road traffic law To replace the need for outrigger stabilizers during heavy highway driving To serve exclusively as an emergency recovery winch for disabled vehicles

Correct Answer:

To allow the host vehicle to load, transport, and unload goods independently without auxiliary crane support

Question 2

In a knuckle-boom lorry loader, what is the specific purpose of the secondary (outer) boom articulated joint?

To allow the crane structure to fold compactly behind the cab or over the load bed and provide close-range maneuverability To increase hydraulic pressure supplied directly to the slewing motor To automatically lock the vehicle suspension during highway travel To disconnect the hydraulic pump from the vehicle power take-off (PTO)

Correct Answer:

To allow the crane structure to fold compactly behind the cab or over the load bed and provide close-range maneuverability

Question 3

Which component transfers mechanical rotation between the vehicle chassis mount and the slewing column of a lorry loader?

Slewing ring bearing driven by a hydraulic motor and pinion gear, or hydraulic slewing rack and pinion rams Telescopic extension cylinder Luffing cylinder rod end Outrigger leg extension beam pin

Correct Answer:

Slewing ring bearing driven by a hydraulic motor and pinion gear, or hydraulic slewing rack and pinion rams

Question 4

What is the function of the main relief valve in a lorry loader hydraulic circuit?

To protect the overall hydraulic system from dangerous over-pressurization by diverting excess oil back to the reservoir To automatically disengage the vehicle PTO when oil temperature drops below 10°C To lock out slewing controls whenever outriggers are fully retracted To increase fluid velocity inside the hydraulic extension cylinders

Correct Answer:

To protect the overall hydraulic system from dangerous over-pressurization by diverting excess oil back to the reservoir

Question 5

What feature on a hydraulic cylinder prevents the boom from collapsing rapidly if a hydraulic hose bursts?

Overcentre (load-holding) check valve mounted directly on or flanged to the cylinder body Manual bleeder screw on the reservoir tank Flexible rubber hose burst sleeve Pressure gauge bypass port

Correct Answer:

Overcentre (load-holding) check valve mounted directly on or flanged to the cylinder body

Exam overview

About this Exam

Prepare with the CPCS A36 Lorry Loader (NOCN CPCS, UK) Practice Questions - CPCS A36 Lorry Loader Theory & Technical Test Exam practice quiz. This question bank includes 100 questions covering loader, lorry, capacity, hydraulic, and operator. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

CPCS A36 Lorry Loader (NOCN CPCS, UK) Practice Questions - CPCS A36 Lorry Loader Theory & Technical Test Exam

This practice set contains 100 questions from the matching question bank and focuses on loader, lorry, capacity, hydraulic, and operator. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

There are currently 100 available practice questions in this quiz.

No fixed duration is currently configured for this quiz.

Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.

Yes. You can retake the practice test again as you continue studying during your available access period.

After your access is confirmed, you can continue into the complete practice exam from this quiz flow.

Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

Correct Answer:

About this Exam

Additional Information

CPCS A36 Lorry Loader (NOCN CPCS, UK) Practice Questions - CPCS A36 Lorry Loader Theory & Technical Test Exam

Frequently Asked Questions

Related Questions

Architecture Licensure Exam History Theory Planning Practice Test

Certified Provider Credentialing Specialist (CPCS) Practice Exam

ABRSM Grade 5 Music Theory Practice Exam

ABRSM Grade 8 Music Theory Practice Exam

Choice Theory/Reality Therapy (CT/RT) Practice Exam

Citi Bank Technical Practice Test