Question 1
In limit state design according to French/Cameroonian reinforced concrete standard BAEL 91 (Béton Armé aux États Limites), what is the combination of actions at the Ultimate Limit State (ELU - État Limite Ultime) under fundamental combinations for permanent loads ($G$) and variable loads ($Q$)?
Correct Answer:
1.35 G + 1.5 Q
Question 2
At the Serviceability Limit State (ELS - État Limite de Service), what combination of permanent dead load ($G$) and live load ($Q$) is used for cracking and deflection checks under BAEL 91?
Correct Answer:
G + Q (rare combination / combinaison rare)
Question 3
What is the design compressive strength of concrete $f_{bu}$ at the Ultimate Limit State (ELU) under BAEL 91 for characteristic 28-day cylinder compressive strength $f_{c28} = 25\text{ MPa}$ under persistent actions (safety factor $\gamma_b = 1.5$ and coefficient $\theta = 1.0$)?
Correct Answer:
14.17 MPa (f_bu = 0.85 · f_c28 / (θ · γ_b))
Question 4
For FeE500 high-yield reinforcing steel ($f_e = 500\text{ MPa}$), what is the design tensile yield strength $f_{su}$ at the Ultimate Limit State under persistent actions (steel safety factor $\gamma_s = 1.15$)?
Correct Answer:
434.8 MPa (~435 MPa, f_su = f_e / γ_s)
Question 5
In a simply supported rectangular reinforced concrete beam subjected to a positive bending moment ($M_u > 0$), where are the primary longitudinal tensile steel reinforcement bars placed?
Correct Answer:
At the bottom of the beam cross-section (soffit / zone tendue inférieure)
Question 1
Exam overview

About this Exam

Prepare with the Cameroon Baccalauréat Série F4 Practice Questions - Cameroon Baccalauréat Technique Série F4 (Génie Civil) Exam practice quiz. This question bank includes 100 questions covering text, concrete, reinforced, beam, and load. Use it to review important concepts, identify knowledge gaps, and build confidence for the related exam, course, or assessment.

More details

Additional Information

Cameroon Baccalauréat Série F4 Practice Questions - Cameroon Baccalauréat Technique Série F4 (Génie Civil) Exam

This practice set contains 100 questions from the matching question bank and focuses on text, concrete, reinforced, beam, and load. Work through each question carefully, review the provided solutions, and revisit topics that need more study before your next attempt.

This is an independent study resource intended for practice and review; it is not an official examination or an endorsement by any organization named in the title.

Quiz information

Frequently Asked Questions

The complete question count is available after full access is unlocked.
No fixed duration is currently configured for this quiz.
Question explanations are included where they are available in the quiz content, helping you review the reasoning after answering.
Yes. You can retake the practice test again as you continue studying during your available access period.
After your access is confirmed, you can continue into the complete practice exam from this quiz flow.
Unless explicitly stated otherwise, this page provides independent practice material for study and exam preparation and is not the official examination itself.
Keep studying

Related Questions