Clover RT Safety Radiation Protection – Minimizing Patient Exposure Practice Exam

When an x-ray beam operates at higher voltage, more photons are already penetrating, so more filtration is needed to remove the low-energy portion that would just increase patient dose without improving image quality. For diagnostic systems above 70 kVp, the standard requirement is a total filtration of 2.5 mm of aluminum equivalent. This total comes from inherent filtration in the tube housing plus added filtration; for example, about 0.5 mm Al inherent plus roughly 2.0 mm Al added to reach the 2.5 mm total. Choosing 2.5 mm Al equivalent as the minimum ensures the beam is sufficiently filtered to reduce patient dose while maintaining adequate beam SAMPLEquality. The other values are either too low to meet the minimum for high-kVp beams or exceed the minimum without necessity.