NM CID GS-7 Practice Questions - New Mexico CID GS-7 Drywall Installation And Texture Examination Exam

Access More Questions

Per ASTM C1396, 5/8-inch Type X gypsum board must provide at least a 1-hour fire-resistance rating in which qualifying test assembly?

A single layer on one side of 24-inch on-center steel studs with no fasteners specified Board applied parallel to both sides of load-bearing 2x4 wood studs 16 inches on center, with 6d coated nails 1-7/8 inches long spaced 7 inches on center and joints staggered 16 inches Two layers of 1/4-inch flexible board on furring with adhesive only Foil-backed 3/8-inch board over a vapor retarder in a shower

Correct Answer:

Board applied parallel to both sides of load-bearing 2x4 wood studs 16 inches on center, with 6d coated nails 1-7/8 inches long spaced 7 inches on center and joints staggered 16 inches

Access more questions from this quiz

Continue to NM CID GS-7 Practice Questions - New Mexico CID GS-7 Drywall Installation and Texture Examination Exam for more practice questions and the full quiz experience.

Access More Questions