REC Electrical Module Practice Test

Starting and stopping a motor safely while protecting it from overheating is what this setup is for. A contactor acts as a heavy-duty switch that is controlled by a low-current control circuit. When the control circuit energizes the contactor coil, the contacts close and energize all three power lines to the motor, allowing it to start under remote or automatic control. The overload relay sits in series with the motor circuit and watches the current; if the motor draws excess current (indicating overload or stall), it trips and opens the circuit, dropping the contactor so power to the motor is cut off. This pairing gives reliable control and essential protection for the motor windings. It’s not about converting AC to DC, nor about regulating frequency or voltage; isolation can be a side effect of opening the contacts, but the primary role is controlled start/stop with overload protection.