Home Inspection 196 Questions And Answers
1 / 10
Terms in this set
196
The preferred method for installing drip-edge flashing is _____________.
over the roofing paper/felt along the rake edge
One of the main purposes of using crushed stone or gravel ballast on a built-up roof is to ________________.
protect the roof from sunlight
A flat roof will usually have _____ installed.
internal drainage
_____ flashing will be found along the peak of the roof.
ridge
Slate tile roofs __________ be walked on.
should not
Modern bathroom receptacles are typically on _________ circuits.
20 amp GFCI
____________ should not be used as a grounding means.
water pipes
Any GFCI breaker or receptacle that _____ should be written up as in need of immediate replacement.
fails to trip and reset properly
Ohms Laws are mathematical models that allows inspectors to understand why a 30-amp fuse should not be connected to a 14-awg wire. T/F?
true
The minimum cable size for a service entrance for a 200-amp supply is ______________.
2/0 copper or 4/0 aluminum