2026 New Hampshire DMV Motorcycle Permit Test 4 (25 Questions And Complete Answers)
1 / 25
Terms in this set
25
Where should a load be placed?
1. As low as possible
2. As high as possible
3. Behind the rear axle
4. On one side of the motorcycle
1. As low as possible
2. As high as possible
3. Behind the rear axle
4. On one side of the motorcycle
As low as possible
To lessen your chances of being involved in an accident, you should:
1. Try to blend into traffic and not be noticed by other drivers.
2. Not use turn signals unless you are traveling at night.
3. Use your turn signals when changing lanes and making turns.
4. Ride closely to the vehicle ahead of you.
1. Try to blend into traffic and not be noticed by other drivers.
2. Not use turn signals unless you are traveling at night.
3. Use your turn signals when changing lanes and making turns.
4. Ride closely to the vehicle ahead of you.
Use your turn signals when changing lanes and making turns.
When passing a row of parked cars to your right when there is no oncoming traffic to your left, you should:
1. Stay toward the right side of your lane.
2. Stay toward the left side of your lane.
3. Look to your left frequently.
4. Use your rearview mirrors more frequently than usual.
1. Stay toward the right side of your lane.
2. Stay toward the left side of your lane.
3. Look to your left frequently.
4. Use your rearview mirrors more frequently than usual.
Stay toward the left side of your lane.
Most motorcycles:
1. Have only a front brake.
2. Have only a rear brake.
3. Have brakes in both the front and rear.
4. Have three brakes: one in the front, one in the rear, and an emergency brake.
1. Have only a front brake.
2. Have only a rear brake.
3. Have brakes in both the front and rear.
4. Have three brakes: one in the front, one in the rear, and an emergency brake.
Have brakes in both the front and rear.
Studies show that most crash-involved riders:...
1. Under-brake the front tire and over-break the rear tire.
2. Over-break the front tire and under-brake the rear tire.
3. Only use the front brake.
4. Only use the rear brake.
1. Under-brake the front tire and over-break the rear tire.
2. Over-break the front tire and under-brake the rear tire.
3. Only use the front brake.
4. Only use the rear brake.
Under-brake the front tire and over-break the rear tire.
When approaching an intersection, you should:
1. Assume other drivers see you, especially if they make eye contact.
2. Never assume other drivers see you.
3. Stay focused on moving through the intersection.
4. Speed up to make others notice you.
1. Assume other drivers see you, especially if they make eye contact.
2. Never assume other drivers see you.
3. Stay focused on moving through the intersection.
4. Speed up to make others notice you.
Never assume other drivers see you.
Because of their small size, motorcycles seem to be:
1. Traveling faster than they actually are.
2. Traveling more slowly than they actually are.
3. Not moving when they actually are.
4. Closer than they actually are.
1. Traveling faster than they actually are.
2. Traveling more slowly than they actually are.
3. Not moving when they actually are.
4. Closer than they actually are.
Traveling faster than they actually are.
Where is the greatest potential for conflict between motorcycle operators and other drivers?
1. At intersections
2. On highways
3. On rural roads
4. In parking lots
1. At intersections
2. On highways
3. On rural roads
4. In parking lots
At intersections
When using a motorcycle with which you are unfamiliar, you should:
1. Test the seat to make sure it is comfortable.
2. Assume the motorcycle is in good riding condition.
3. Work the throttle, clutch, and brakes a few times before riding.
4. Ride as you usually do, since most bikes are similar.
1. Test the seat to make sure it is comfortable.
2. Assume the motorcycle is in good riding condition.
3. Work the throttle, clutch, and brakes a few times before riding.
4. Ride as you usually do, since most bikes are similar.
Work the throttle, clutch, and brakes a few times before riding.
When looking through a turn to see where you are going, you should:
1. Turn just your head.
2. Turn your head and shoulders.
3. Turn just your shoulders.
4. Turn your entire body.
1. Turn just your head.
2. Turn your head and shoulders.
3. Turn just your shoulders.
4. Turn your entire body.
Turn just your head.
Showing the first 10 terms. Use the flashcard player above to study all 25 terms!