2026 New Hampshire DMV Knowledge Test Class A Test 2 (50 Questions And Complete Answers)
1 / 50
Terms in this set
50
When driving through a curve during the skills test, you should:
1. Veer from your lane if needed to complete the curve.
2. Reduce your speed after entering the curve.
3. Refrain from looking for other vehicles while turning.
4. Reduce your speed before entering the curve.
1. Veer from your lane if needed to complete the curve.
2. Reduce your speed after entering the curve.
3. Refrain from looking for other vehicles while turning.
4. Reduce your speed before entering the curve.
Reduce your speed before entering the curve.
When you need to brake, how can you warn drivers behind you?
1. Tap on the brakes a couple of times.
2. Stick your arm out the window.
3. Swerve within your lane.
4. Change lanes.
1. Tap on the brakes a couple of times.
2. Stick your arm out the window.
3. Swerve within your lane.
4. Change lanes.
Tap on the brakes a couple of times.
Regrooved tires:
1. Should not be used on any vehicle.
2. Should not be used on the front of a bus.
3. Should not be used on trucks hauling gravel.
1. Should not be used on any vehicle.
2. Should not be used on the front of a bus.
3. Should not be used on trucks hauling gravel.
Should not be used on the front of a bus.
If your brakes fail on a downgrade, your best hope to stop is:
1. An escape ramp.
2. Driving on the shoulder.
3. Stay on the road.
4. Hitting a slower vehicle in front of you.
1. An escape ramp.
2. Driving on the shoulder.
3. Stay on the road.
4. Hitting a slower vehicle in front of you.
An escape ramp.
When operating a vehicle with a dual air brake system, the driver should:
1. Let the vehicle warm up before driving to ensure that the fuel reaches the engine.
2. Let the air compressor build up a minimum of 100 psi pressure in the primary and secondary systems before driving.
3. Begin driving just after the vehicle starts.
1. Let the vehicle warm up before driving to ensure that the fuel reaches the engine.
2. Let the air compressor build up a minimum of 100 psi pressure in the primary and secondary systems before driving.
3. Begin driving just after the vehicle starts.
Let the air compressor build up a minimum of 100 psi pressure in the primary and secondary systems before driving.
If driving so slowly that you could impede other drivers, you should:
1. Drive in the left lane.
2. Drive while using your four-way flashers.
3. Drive without using any lights.
1. Drive in the left lane.
2. Drive while using your four-way flashers.
3. Drive without using any lights.
Drive while using your four-way flashers.
Mirror adjustment should be:
1. Checked once a month.
2. Checked before every trip.
3. Checked, but only if the driver plans to use the mirrors.
1. Checked once a month.
2. Checked before every trip.
3. Checked, but only if the driver plans to use the mirrors.
Checked before every trip.
If using a helper when backing a vehicle, the helper should be located:
1. In front of the passenger's side of the vehicle.
2. Near the back of the truck.
3. In front of the passenger's side of the vehicle.
1. In front of the passenger's side of the vehicle.
2. Near the back of the truck.
3. In front of the passenger's side of the vehicle.
Near the back of the truck.
Traction is important in:
1. Safe braking.
2. Properly using turn signals.
3. Operating the horn.
1. Safe braking.
2. Properly using turn signals.
3. Operating the horn.
Safe braking.
When asked to make a lane change during the skills test, you should:
1. Make the necessary traffic checks first.
2. Not use your mirrors.
3. Cut off other vehicles if needed to follow the instructions.
4. Not make the lane change if you don’t want to.
1. Make the necessary traffic checks first.
2. Not use your mirrors.
3. Cut off other vehicles if needed to follow the instructions.
4. Not make the lane change if you don’t want to.
Make the necessary traffic checks first.
Showing the first 10 terms. Use the flashcard player above to study all 50 terms!