2026 Montana DMV Motorcycle Permit Test 2 (25 Questions And Complete Answers)
1 / 25
Terms in this set
25
When riding with a passenger, the operator should:
1. Maintain a longer following distance.
2. Increase their speed.
3. Deflate the tires to accommodate the extra weight.
4. Not warn passengers of impending hazards.
1. Maintain a longer following distance.
2. Increase their speed.
3. Deflate the tires to accommodate the extra weight.
4. Not warn passengers of impending hazards.
Maintain a longer following distance.
You should do a pre-ride inspection:
1. Before every ride.
2. About once every 10 rides.
3. Once a month.
4. Once a season.
1. Before every ride.
2. About once every 10 rides.
3. Once a month.
4. Once a season.
Before every ride.
A plastic, shatter-resistant face shield:
1. Is not necessary if you have a windshield.
2. Only protects your eyes.
3. Helps protect your whole face.
4. Is less effective than goggles.
1. Is not necessary if you have a windshield.
2. Only protects your eyes.
3. Helps protect your whole face.
4. Is less effective than goggles.
Helps protect your whole face.
When passing another vehicle:
1. You must complete the pass without exceeding the speed limit.
2. You may complete the pass in a no passing zone if the pass was started before the no passing zone began.
3. You may exceed the speed limit.
4. You should pass on the shoulder.
1. You must complete the pass without exceeding the speed limit.
2. You may complete the pass in a no passing zone if the pass was started before the no passing zone began.
3. You may exceed the speed limit.
4. You should pass on the shoulder.
You must complete the pass without exceeding the speed limit.
Most motorcycle crashes happen:
1. On short trips.
2. On long trips.
3. After at least an hour of riding.
4. After more than 8 hours of riding.
1. On short trips.
2. On long trips.
3. After at least an hour of riding.
4. After more than 8 hours of riding.
On short trips.
Before mounting your motorcycle, perform all of the following checks, except:
1. Making sure the headlight works.
2. Checking the oil level.
3. Trying both brake controls to ensure the brake light activates.
4. Ensuring that the paint is not scratched.
1. Making sure the headlight works.
2. Checking the oil level.
3. Trying both brake controls to ensure the brake light activates.
4. Ensuring that the paint is not scratched.
Ensuring that the paint is not scratched.
A DOT-compliant helmet has all of the following, except:
1. An impact-resistant outer shell.
2. An impact-absorbing inner liner.
3. A chinstrap retention system.
4. Bright colors painted on the outside.
1. An impact-resistant outer shell.
2. An impact-absorbing inner liner.
3. A chinstrap retention system.
4. Bright colors painted on the outside.
Bright colors painted on the outside.
It is most important to flash your brake light when:
1. Passing another vehicle.
2. You will be slowing down suddenly.
3. There is a stop sign ahead.
4. Your signals do not work.
1. Passing another vehicle.
2. You will be slowing down suddenly.
3. There is a stop sign ahead.
4. Your signals do not work.
You will be slowing down suddenly.
When riding on a slippery surface, you should:
1. Increase your speed.
2. Make sudden moves.
3. Move to the edge of the road.
4. Ride in the tire tracks left by cars.
1. Increase your speed.
2. Make sudden moves.
3. Move to the edge of the road.
4. Ride in the tire tracks left by cars.
Ride in the tire tracks left by cars.
The front brake supplies how much of a motorcycle's stopping power?
1. About one-quarter
2. About one-half
3. About three-quarters
4. All the stopping power
1. About one-quarter
2. About one-half
3. About three-quarters
4. All the stopping power
About three-quarters
Showing the first 10 terms. Use the flashcard player above to study all 25 terms!