2026 Montana DMV Motorcycle Permit Test 1 (25 Questions And Complete Answers)
1 / 25
Terms in this set
25
To stop quickly, you should:
1. Use only the rear brake.
2. Use only the front brake.
3. Use both brakes.
4. Use the rear brake firmly while gradually increasing the braking pressure of the front brake.
1. Use only the rear brake.
2. Use only the front brake.
3. Use both brakes.
4. Use the rear brake firmly while gradually increasing the braking pressure of the front brake.
Use both brakes.
The best way to stop quickly is to:
1. Use the front brake only.
2. Use the front brake first.
3. Throttle down and use the front brake.
4. Use both brakes at the same time.
1. Use the front brake only.
2. Use the front brake first.
3. Throttle down and use the front brake.
4. Use both brakes at the same time.
Use both brakes at the same time.
Which of the following surfaces does not provide poor traction?
1. Wet pavement
2. Dry pavement
3. Lane markings
4. Snow
1. Wet pavement
2. Dry pavement
3. Lane markings
4. Snow
Dry pavement
When being followed too closely by another vehicle, you should:
1. Speed up.
2. Move onto the shoulder.
3. Allow the other driver to pass you.
4. Exit the roadway.
1. Speed up.
2. Move onto the shoulder.
3. Allow the other driver to pass you.
4. Exit the roadway.
Allow the other driver to pass you.
nThe center portion of a traffic lane is where:
1. Debris and oil drippings from cars often collect.
2. Motorcycle riders should always travel for safety.
3. Most accidents happen.
4. Drivers are least likely to see a motorcyclist.
1. Debris and oil drippings from cars often collect.
2. Motorcycle riders should always travel for safety.
3. Most accidents happen.
4. Drivers are least likely to see a motorcyclist.
Debris and oil drippings from cars often collect.
When preparing to pass another vehicle, you should ride in the left portion of your lane because:'
1. It increases your line of sight.
2. It decreases your line of sight.
3. It makes it difficult to see beyond the vehicle.
4. It allows the other driver to speed up.
1. It increases your line of sight.
2. It decreases your line of sight.
3. It makes it difficult to see beyond the vehicle.
4. It allows the other driver to speed up.
It increases your line of sight.
To increase your visibility, you should:
1. Turn off your headlight during the day.
2. Wear dark clothes.
3. Keep your headlight on at all times.
4. Ride in the right portion of the lane.
1. Turn off your headlight during the day.
2. Wear dark clothes.
3. Keep your headlight on at all times.
4. Ride in the right portion of the lane.
Keep your headlight on at all times.
To prevent getting fatigued on a long ride, you should do all of the following, except:
1. Dress warmly.
2. Limit the distance traveled in a day.
3. Take frequent rest breaks.
4. Take artificial stimulants.
1. Dress warmly.
2. Limit the distance traveled in a day.
3. Take frequent rest breaks.
4. Take artificial stimulants.
Take artificial stimulants.
When braking on a slippery surface, you should:
1. Use both the front and rear brakes.
2. Use abrupt pressure on the front brake to prevent locking the front tire.
3. Only use the rear brake.
4. Use either brake, but use only one brake.
1. Use both the front and rear brakes.
2. Use abrupt pressure on the front brake to prevent locking the front tire.
3. Only use the rear brake.
4. Use either brake, but use only one brake.
Use both the front and rear brakes.
How does the stopping distance for motorcycles compare to the stopping distance for cars?
1. Cars need much longer to stop.
2. Cars need a little longer to stop.
3. Motorcycles need longer to stop.
4. Both motorcycles and cars take about the same amount of time to stop.
1. Cars need much longer to stop.
2. Cars need a little longer to stop.
3. Motorcycles need longer to stop.
4. Both motorcycles and cars take about the same amount of time to stop.
Both motorcycles and cars take about the same amount of time to stop.
Showing the first 10 terms. Use the flashcard player above to study all 25 terms!