2026 Montana DMV HazMat Endorsement Test 2 (30 Questions And Complete Answers)
1 / 30
Terms in this set
30
If a shipping paper describes both hazardous and non-hazardous materials, the hazardous materials may need to be:
1. Highlighted in a contrasting color.
2. Circled by a pen or marker.
3. Unmarked.
1. Highlighted in a contrasting color.
2. Circled by a pen or marker.
3. Unmarked.
Highlighted in a contrasting color.
What does "RQ" stand for?
1. Relative query
2. Reportable quantity
3. Release query
4. Response quarantine
1. Relative query
2. Reportable quantity
3. Release query
4. Response quarantine
Reportable quantity
Shippers must keep a copy of shipping papers for:
1. Six weeks.
2. Six months.
3. One year.
4. Two years.
1. Six weeks.
2. Six months.
3. One year.
4. Two years.
Two years.
In the Hazardous Materials Table, Column 2 lists:
1. The names of materials.
2. Where materials originate.
3. Special provisions for materials.
1. The names of materials.
2. Where materials originate.
3. Special provisions for materials.
The names of materials.
Flammable gases are categorized as ____ hazards.
1. Class 1
2. Class 2
3. Class 4
4. Class 7
1. Class 1
2. Class 2
3. Class 4
4. Class 7
Class 2
When traveling with Division 1.1, 1.2, or 1.3 explosives, the vehicle should not be:
1. Parked within 300 feet of a bridge.
2. Parked within 40 feet of the road.
3. Parked for only short periods of time.
4. Parked on grass.
1. Parked within 300 feet of a bridge.
2. Parked within 40 feet of the road.
3. Parked for only short periods of time.
4. Parked on grass.
Parked within 300 feet of a bridge.
A person should not smoke within ____ of a vehicle placarded for Class 3 or Division 2.1 materials.
1. 10 feet
2. 25 feet
3. 100 feet
4. 1,000 feet
1. 10 feet
2. 25 feet
3. 100 feet
4. 1,000 feet
25 feet
To know which placard to use, you need to know:
1. The hazard class of the materials.
2. The type of container that is holding the materials.
3. The destination of the materials.
1. The hazard class of the materials.
2. The type of container that is holding the materials.
3. The destination of the materials.
The hazard class of the materials.
When transporting Division 1.1 materials, the floor liner should be:
1. Made from metallic materials.
2. Made from an iron alloy.
3. Made from non-ferrous materials.
4. Loose.
1. Made from metallic materials.
2. Made from an iron alloy.
3. Made from non-ferrous materials.
4. Loose.
Made from non-ferrous materials.
To operate a vehicle that is used to transport hazardous materials, a driver must have:
1. Only a CDL.
2. A CDL with a hazardous materials endorsement.
3. A CDL with a passenger endorsement.
4. A CDL with an air brake endorsement.
1. Only a CDL.
2. A CDL with a hazardous materials endorsement.
3. A CDL with a passenger endorsement.
4. A CDL with an air brake endorsement.
A CDL with a hazardous materials endorsement.
Showing the first 10 terms. Use the flashcard player above to study all 30 terms!