2026 Missouri DMV Knowledge Test Class A Test 2 (50 Questions And Complete Answers)
1 / 50
Terms in this set
50
When starting an engine:
1. The brakes will lock up.
2. Warning lights should turn on, then quickly turn off.
3. Coolant temperatures should decrease.
1. The brakes will lock up.
2. Warning lights should turn on, then quickly turn off.
3. Coolant temperatures should decrease.
Warning lights should turn on, then quickly turn off.
Which of the following is not a good rule when using turn signals?
1. Signal early. Signal well before a turn or lane change.
2. Signal continuously. Do not cancel a signal until the turn is completed.
3. Don’t over-signal. If no one is near you, there is no need to signal.
1. Signal early. Signal well before a turn or lane change.
2. Signal continuously. Do not cancel a signal until the turn is completed.
3. Don’t over-signal. If no one is near you, there is no need to signal.
Don’t over-signal. If no one is near you, there is no need to signal.
Air brakes use ____ to function.
1. Compressed air
2. Liquid air
3. Nitrogen
1. Compressed air
2. Liquid air
3. Nitrogen
Compressed air
When driving a vehicle equipped with an Anti-Lock Braking System (ABS), you should:
1. Always pump the brakes several times before holding down the brake pedal.
2. Brake normally.
3. Press down the brake pedal as hard as possible every time you slow or stop.
1. Always pump the brakes several times before holding down the brake pedal.
2. Brake normally.
3. Press down the brake pedal as hard as possible every time you slow or stop.
Brake normally.
Brake linings should be:
1. Loose.
2. Free of oil.
3. Soft.
1. Loose.
2. Free of oil.
3. Soft.
Free of oil.
Hydroplaning happens most often when:
1. A vehicle is traveling faster than 60 mph.
2. Tire pressure is too low.
3. Tire tread is too deep.
1. A vehicle is traveling faster than 60 mph.
2. Tire pressure is too low.
3. Tire tread is too deep.
Tire pressure is too low.
When loading a trailer, it is important to:
1. Place as little weight as possible over the axles.
2. Place a well-balanced amount of weight over the axles.
3. Place weight over only the axles.
1. Place as little weight as possible over the axles.
2. Place a well-balanced amount of weight over the axles.
3. Place weight over only the axles.
Place a well-balanced amount of weight over the axles.
When inspecting your tires, you do not want to find:
1. Tire tread that is 4/32 of an inch deep.
2. Valve stems without damage.
3. Mismatched tire sizes.
1. Tire tread that is 4/32 of an inch deep.
2. Valve stems without damage.
3. Mismatched tire sizes.
Mismatched tire sizes.
A bridge formula:
1. Permits less weight per axle for axles that are close together.
2. Permits more weight for trucks.
3. Is not a concern for drivers.
1. Permits less weight per axle for axles that are close together.
2. Permits more weight for trucks.
3. Is not a concern for drivers.
Permits less weight per axle for axles that are close together.
What is reaction distance?
1. The distance you will travel between realizing you must brake and when you physically hit the brakes
2. The distance you will travel between a hazard becoming visible and you seeing the hazard
3. The distance you will travel between seeing a hazard and realizing you must brake
1. The distance you will travel between realizing you must brake and when you physically hit the brakes
2. The distance you will travel between a hazard becoming visible and you seeing the hazard
3. The distance you will travel between seeing a hazard and realizing you must brake
The distance you will travel between realizing you must brake and when you physically hit the brakes
Showing the first 10 terms. Use the flashcard player above to study all 50 terms!