2026 Minnesota DMV HazMat Endorsement Test 2 (27 Questions And Complete Answers)

DMV 27 Terms | 2026 Minnesota DMV HazMat Endorsement Test 2 (27 Questions And Complete Answers)
1 / 27
Terms in this set 27
If a vehicle is accompanied by a vehicle inspection report:

1. The driver should first inspect the vehicle, then compare their notes with the report.
2. The driver should first look at the report when completing an inspection.
3. The driver should not conduct a pre-trip inspection and should rely only on the report.
The driver should first look at the report when completing an inspection.
When an engine is running, an acceptable oil pressure would be:

1. 10 psi.
2. 50 psi.
3. 110 psi.
50 psi.
When stopped on the side of the road, the driver should:

1. Keep their side door open.
2. Turn on their emergency flashers.
3. Wave their arms.
4. Turn off all their lights.
Turn on their emergency flashers.
ABS allows you to:

1. Drive faster.
2. Brake harder.
3. Stay in control when stopping.
Stay in control when stopping.
When approaching a vehicle for a pre-trip inspection, a driver should look under the vehicle:

1. To see if the vehicle is on an incline.
2. To see if there are any fresh fluids under the vehicle.
3. To see if the vehicle is in a parking spot.
4. To see if the vehicle is on a decline.
To see if there are any fresh fluids under the vehicle.
When approaching your vehicle as part of your pre-trip inspection, you should look for what as a sign of trouble?

1. A puddle of oil under the vehicle
2. Inflated tires
3. Lights that are not cracked
A puddle of oil under the vehicle
Which of the following is a sign of a potentially drunk driver?

1. They are staying in their traffic lane.
2. They are driving a consistent speed.
3. They are stopping without a reason.
4. They have alcohol-related bumper stickers on their vehicle.
They are stopping without a reason.
____ identical placards must be placed on a vehicle transporting hazardous materials.

1. One
2. Two
3. Three
4. Four
Four
A person should not smoke within ____ of a vehicle placarded for Class 3 or Division 2.1 materials.

1. 10 feet
2. 25 feet
3. 100 feet
4. 1,000 feet
25 feet
During a basic vehicle control skills test, a look is when:

1. A driver checks the gauges on their instrument panel.
2. A driver checks their blind spots.
3. A driver walks to the back of their vehicle to check its position.
A driver walks to the back of their vehicle to check its position.

Showing the first 10 terms. Use the flashcard player above to study all 27 terms!