2026 Michigan DMV Permit Test 19 (41 Questions And Complete Answers)

When approached by an emergency vehicle that is using its siren and/or flashing lights, a driver must immediately:'

1. Pull to the right and stop.
2. Pull to the right and slow down.
3. Pull to the right and turn on their vehicle's four-way flashers.
4. Stop and let the emergency vehicle pass.

If a green arrow turns into a solid green light, you':

1. May still turn, but you must yield to oncoming traffic.
2. May no longer turn and must proceed straight.
3. Still have the right-of-way to turn.
4. No longer have to turn in the direction that the arrow indicated.

When turning left, drivers must yield the right-of-way to:

1. Other drivers who are already in the intersection.
2. Oncoming traffic.
3. Pedestrians who are already in the intersection.
4. All of the above.

When approaching a railroad crossing warning sign:

1. Be ready to drive faster than the train.
2. Be prepared to stop if a train is nearby.
3. Look for a way around any lowered gates.
4. Assume no trains are nearby and continue driving normally.

If another driver cuts you off in traffic, you should:

1. Pull next to the driver and yell at them.
2. Let it go.
3. Flash your high beams at the driver.
4. Get back at the other driver by cutting them off.

Before turning left, it is important to:

1. Sound your horn.
2. Yield to oncoming vehicles.
3. Swing to the right side of your lane.
4. Wait until oncoming traffic has a red light.

Work zone signs mean:

1. It is summer.
2. You must immediately stop and back up.
3. Less than ideal conditions are present for driving.
4. You should drive faster to get out of the work zone.

Defensive driving is:

1. Driving aggressively.
2. Using safe driving strategies to prevent crashes.
3. More dangerous than not driving defensively.
4. A bad idea.

To be safe when crossing a railroad, you should:

1. Look both ways, but only when the red light is flashing.
2. Listen, look both ways, and then proceed if it is safe to do so.
3. Cross especially quickly when a train is approaching.
4. Quickly pass under any lowering gates.

While driving on a two-lane road without bicycle lanes, you encounter a bicyclist traveling in the same direction. What is the safest way to pass the bicyclist?

1. Slow down and wait until there is no traffic approaching, then pass the bicyclist while leaving him or her sufficient space.
2. Continue driving straight. It is the bicyclist’s responsibility to get out of your way.
3. Do not pass the bicyclist until you come to a traffic signal or stop sign.
4. Honk at the bicyclist to let him or her know you are about to pass.