2026 Massachusetts DMV Tank Endorsement Test 2 (20 Questions And Complete Answers)
DMV20 Terms|2026 Massachusetts DMV Tank Endorsement Test 2 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
After a trip:
1. A vehicle should be placed out-of-service.
2. A vehicle's oil should be changed.
3. A vehicle's after-trip inspection should be completed.
4. A vehicle's battery should be disconnected.
A vehicle's after-trip inspection should be completed.
Due to the risk of liquid surge in tanks, you should:
1. Accelerate slowly.
2. Accelerate quickly.
3. Swerve often.
4. Drive on the shoulder.
Accelerate slowly.
After finishing a pre-trip inspection, you should:
1. Leave the rear shut-off valves open.
2. Remove the service line valve.
3. Close the emergency line valve.
4. Leave the emergency line valve open.
Close the emergency line valve.
When a construction worker is close to the road, you should:
1. Increase your speed.
2. Decrease your speed.
3. Not drive in any lane.
4. Wait to proceed until the construction is complete.
Decrease your speed.
Headlights:
1. Are not usually necessary when driving at night.
2. Provide better light than the sun.
3. Should be on the high beam setting whenever possible.
4. Should always be on the high beam setting.
Should be on the high beam setting whenever possible.
When driving, your mirrors should:
1. Not be used, as they are distracting.
2. Not be used unless there is traffic.
3. Be checked regularly.
4. Be checked regularly, but only if it is cloudy.
Be checked regularly.
During a pre-trip inspection, belts in the engine compartment should be:
1. Loosened.
2. Checked for tightness.
3. Inspected only if they seem frayed.
4. Left alone and not inspected.
Checked for tightness.
When turning quickly to avoid an object in the roadway, you should:
1. Apply your brakes as you steer.
2. Give yourself extra clearance by turning more than needed to miss the object.
3. Turn just enough to miss the object and avoid turning more.
4. Steer and accelerate at the same time.
Turn just enough to miss the object and avoid turning more.
What is aggressive driving?
1. Operating a vehicle in a selfish or pushy manner
2. Operating a vehicle with some regard for other motorists’ safety
3. Operating a vehicle in the left lane
4. Operating a loud vehicle
Operating a vehicle in a selfish or pushy manner
Passive railroad crossings:
1. Are controlled by flashing lights.
2. Are not controlled by any type of traffic control device.
3. Have gates that lower when trains are approaching.
4. Should never be crossed by a CMV.
Are not controlled by any type of traffic control device.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!