2026 Maryland DMV Permit Test 14 (21 Questions And Complete Answers)
1 / 21
Terms in this set
21
When using a deceleration lane to exit a roadway:
1. Do not use your turn signal until the vehicle has moved into the deceleration lane.
2. Do not follow the posted warning speeds unless the roadway is slippery.
3. Do not slow down until your vehicle has moved into the deceleration lane.
1. Do not use your turn signal until the vehicle has moved into the deceleration lane.
2. Do not follow the posted warning speeds unless the roadway is slippery.
3. Do not slow down until your vehicle has moved into the deceleration lane.
Do not slow down until your vehicle has moved into the deceleration lane.
If you experience a tire blowout:
1. Tap or pump the brakes.
2. Slow down gradually and use your brakes lightly.
3. Apply the brakes firmly and quickly.
1. Tap or pump the brakes.
2. Slow down gradually and use your brakes lightly.
3. Apply the brakes firmly and quickly.
Slow down gradually and use your brakes lightly.
To be able to turn quickly, your hands must be:
1. On opposite sides of the steering wheel.
2. Next to each other on the top of the steering wheel.
3. On the top and bottom of the steering wheel.
1. On opposite sides of the steering wheel.
2. Next to each other on the top of the steering wheel.
3. On the top and bottom of the steering wheel.
On opposite sides of the steering wheel.
Hydroplaning is when the:
1. Windshield wipers cannot keep the windshield clear of rain.
2. Tires lose contact with the road surface.
3. Spray from a large truck reduces visibility.
1. Windshield wipers cannot keep the windshield clear of rain.
2. Tires lose contact with the road surface.
3. Spray from a large truck reduces visibility.
Tires lose contact with the road surface.
Night driving presents unique problems because:
1. The speed limit is increased at night.
2. There are fewer cars on the roads at night.
3. Distance and vehicle speed are difficult to judge in the dark.
1. The speed limit is increased at night.
2. There are fewer cars on the roads at night.
3. Distance and vehicle speed are difficult to judge in the dark.
Distance and vehicle speed are difficult to judge in the dark.
From top to bottom, the following is the proper order for traffic lights:
1. Red, yellow, green.
2. Red, green, yellow.
3. Green, red, yellow.
1. Red, yellow, green.
2. Red, green, yellow.
3. Green, red, yellow.
Red, yellow, green.
If you want to pass a pedestrian who is walking along the roadway and an oncoming vehicle is approaching, you should:
1. Slow down and let the oncoming vehicle pass before you pass the pedestrian.
2. Keep driving at a steady speed. The oncoming vehicle must stop for you.
3. Honk your horn to get the pedestrian to move over.
1. Slow down and let the oncoming vehicle pass before you pass the pedestrian.
2. Keep driving at a steady speed. The oncoming vehicle must stop for you.
3. Honk your horn to get the pedestrian to move over.
Slow down and let the oncoming vehicle pass before you pass the pedestrian.
When changing lanes, you can check your blind spot by:
1. Using the inside rearview mirror.
2. Turning your head and looking over your shoulder.
3. Using your side mirror.
1. Using the inside rearview mirror.
2. Turning your head and looking over your shoulder.
3. Using your side mirror.
Turning your head and looking over your shoulder.
The maximum posted speed limit should be driven only:
1. During the night.
2. During the day.
3. Under ideal conditions.
1. During the night.
2. During the day.
3. Under ideal conditions.
Under ideal conditions.
If oncoming headlights are blinding you while you are driving at night, you should:
1. Look toward the right edge of the road.
2. Switch your lights to high beams.
3. Turn your lights on and off.
1. Look toward the right edge of the road.
2. Switch your lights to high beams.
3. Turn your lights on and off.
Look toward the right edge of the road.
Showing the first 10 terms. Use the flashcard player above to study all 21 terms!