2026 Maryland DMV Motorcycle Permit Test 3 (25 Questions And Complete Answers)
1 / 25
Terms in this set
25
When riding in a group while passing another vehicle, it is best to:
1. Allow one rider to fully pass the other vehicle before another rider begins to pass.
2. Allow several members of the group to pass the other vehicle at once.
3. Have the last rider in the group wave to the driver being passed to signal that no other motorcycles are approaching.
4. Pass in a staggered formation.
1. Allow one rider to fully pass the other vehicle before another rider begins to pass.
2. Allow several members of the group to pass the other vehicle at once.
3. Have the last rider in the group wave to the driver being passed to signal that no other motorcycles are approaching.
4. Pass in a staggered formation.
Allow one rider to fully pass the other vehicle before another rider begins to pass.
A passenger on a motorcycle should:
1. Mount the motorcycle before the engine starts.
2. Mount the motorcycle after the engine starts.
3. Sit as close to the rear of the motorcycle as possible.
4. Hold onto the seat.
1. Mount the motorcycle before the engine starts.
2. Mount the motorcycle after the engine starts.
3. Sit as close to the rear of the motorcycle as possible.
4. Hold onto the seat.
Mount the motorcycle after the engine starts.
When riding in a group, motorcyclists:
1. Do not need space cushions.
2. Should increase their space cushions.
3. Should reduce their usual space cushions by half.
4. Should maintain adequate space cushions.
1. Do not need space cushions.
2. Should increase their space cushions.
3. Should reduce their usual space cushions by half.
4. Should maintain adequate space cushions.
Should maintain adequate space cushions.
The front brake:
1. Should only be used when you need to stop quickly.
2. Should be used only under slippery conditions.
3. Is not as effective as the rear brake.
4. Is safe to use, if used properly.
1. Should only be used when you need to stop quickly.
2. Should be used only under slippery conditions.
3. Is not as effective as the rear brake.
4. Is safe to use, if used properly.
Is safe to use, if used properly.
Face shields and goggles:
1. Will likely never need to be replaced.
2. Will develop scratches and become brittle, requiring regular replacement.
3. Should be made of breakable materials so they can break away in the event of a crash.
4. Should not allow air to pass through.
1. Will likely never need to be replaced.
2. Will develop scratches and become brittle, requiring regular replacement.
3. Should be made of breakable materials so they can break away in the event of a crash.
4. Should not allow air to pass through.
Will develop scratches and become brittle, requiring regular replacement.
When it is raining, it is usually best to:
1. Ride in the center of the lane.
2. Pull off to the side of the road until the rain stops.
3. Ride in the tire tracks left by cars.
4. Increase your speed.
1. Ride in the center of the lane.
2. Pull off to the side of the road until the rain stops.
3. Ride in the tire tracks left by cars.
4. Increase your speed.
Ride in the tire tracks left by cars.
The single most important thing you can do to improve your chances of surviving a crash is to:
1. Wear a high-quality helmet that is securely fastened.
2. Wear shorts.
3. Wear sneakers.
4. Wear goggles.
1. Wear a high-quality helmet that is securely fastened.
2. Wear shorts.
3. Wear sneakers.
4. Wear goggles.
Wear a high-quality helmet that is securely fastened.
The faster you drink:
1. The more the alcohol will accumulate in your body.
2. The faster the alcohol is removed from your body.
3. The more minimal the effects of the alcohol will be.
4. The more likely you will be able to evade being pulled over.
1. The more the alcohol will accumulate in your body.
2. The faster the alcohol is removed from your body.
3. The more minimal the effects of the alcohol will be.
4. The more likely you will be able to evade being pulled over.
The more the alcohol will accumulate in your body.
Approved helmets:
1. Can limit the view of the motorcycle operator.
2. Allow the motorcycle operator to see as far to the sides as necessary.
3. Are dangerous to wear.
4. Do not have to be worn if the motorcycle operator thinks their view would be limited.
1. Can limit the view of the motorcycle operator.
2. Allow the motorcycle operator to see as far to the sides as necessary.
3. Are dangerous to wear.
4. Do not have to be worn if the motorcycle operator thinks their view would be limited.
Allow the motorcycle operator to see as far to the sides as necessary.
Which of the following is not a good safety tip?
1. Slow to a safe speed before turning.
2. When turning, lean in the direction you wish to go.
3. Avoid dragging your feet on the roadway.
4. Avoid looking at other vehicles.
1. Slow to a safe speed before turning.
2. When turning, lean in the direction you wish to go.
3. Avoid dragging your feet on the roadway.
4. Avoid looking at other vehicles.
Avoid looking at other vehicles.
Showing the first 10 terms. Use the flashcard player above to study all 25 terms!