2026 Maryland DMV Double Endorsement Test 1 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
The trailer hand valve should be used:
1. To test the trailer brakes.
2. To check the connection between the trailer and tractor.
3. To accelerate.
4. To test the lights on the trailer.
1. To test the trailer brakes.
2. To check the connection between the trailer and tractor.
3. To accelerate.
4. To test the lights on the trailer.
To test the trailer brakes.
Which of the following is not a type of retarder?
1. Exhaust
2. Engine
3. Air
4. Electric
1. Exhaust
2. Engine
3. Air
4. Electric
Air
If a vehicle is found to be over-length during a pre-trip inspection, the driver should:
1. Trim the length of the load.
2. Ask someone else to drive.
3. Ensure flags and lights indicating the oversize load are fastened securely.
4. Drive without making any changes.
1. Trim the length of the load.
2. Ask someone else to drive.
3. Ensure flags and lights indicating the oversize load are fastened securely.
4. Drive without making any changes.
Ensure flags and lights indicating the oversize load are fastened securely.
If a driver has stopped on the road and is placing triangles to warn other motorists:
1. The triangles should be held between the driver and oncoming traffic.
2. The triangles should be carried behind the driver's back to prevent them from being seen by other drivers until they are placed.
3. The triangles should be held as low as possible.
1. The triangles should be held between the driver and oncoming traffic.
2. The triangles should be carried behind the driver's back to prevent them from being seen by other drivers until they are placed.
3. The triangles should be held as low as possible.
The triangles should be held between the driver and oncoming traffic.
Front brake limiting valves were intended to:
1. Prevent the front tires from skidding.
2. Prevent the front tires from overheating.
3. Create equal brake usage.
1. Prevent the front tires from skidding.
2. Prevent the front tires from overheating.
3. Create equal brake usage.
Prevent the front tires from skidding.
On trucks and buses, where are ABS malfunction lamps located?
1. On the driver’s door
2. On the instrument panel
3. On the outside of the vehicle by the passenger’s door
4. Under the hood
1. On the driver’s door
2. On the instrument panel
3. On the outside of the vehicle by the passenger’s door
4. Under the hood
On the instrument panel
The "crack-the-whip" effect is caused by:
1. Rearward amplification.
2. Driving below the speed limit.
3. Heavy traffic.
1. Rearward amplification.
2. Driving below the speed limit.
3. Heavy traffic.
Rearward amplification.
If carrying a heavy load that is slowing you down, you should:
1. Drive in the left lane.
2. Drive in the right lane.
3. Drive on the shoulder.
4. Keep the vehicle in second gear.
1. Drive in the left lane.
2. Drive in the right lane.
3. Drive on the shoulder.
4. Keep the vehicle in second gear.
Drive in the right lane.
As part of a pre-trip inspection, you should look for all of the following, except:
1. Tires with too much air pressure.
2. Tires with too much wear.
3. Tires made by different manufacturers.
1. Tires with too much air pressure.
2. Tires with too much wear.
3. Tires made by different manufacturers.
Tires made by different manufacturers.
If confronted by an aggressive driver, you should:
1. Stay in their path.
2. Make eye contact with the driver.
3. Make gestures at the driver.
4. Report the driver.
1. Stay in their path.
2. Make eye contact with the driver.
3. Make gestures at the driver.
4. Report the driver.
Report the driver.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!