2026 Kentucky DMV Motorcycle Permit Test 6 (30 Questions And Complete Answers)

DMV 30 Terms | 2026 Kentucky DMV Motorcycle Permit Test 6 (30 Questions And Complete Answers)
1 / 30
Terms in this set 30
All of the following will lessen your chances of being involved in an accident, except:

1. Remaining alert.
2. Identifying hazards and prioritizing risks.
3. Riding without a headlight.
4. Maintaining a space cushion.
Riding without a headlight.
Where is the throttle usually located?

1. Near the left footrest
2. Near the right footrest
3. On the left handle grip
4. On the right handle grip
On the right handle grip
When braking, you should use:

1. The front brake only.
2. The rear brake only.
3. Both front and rear brakes.
4. Either the front or rear brake, but not both.
Both front and rear brakes.
A plastic, shatter-resistant face shield protects the wearer from:

1. Insects.
2. Headlight glare.
3. Noise.
4. Sunshine.
Insects.
Before every ride, it is important to check all of the following, except:

1. The spokes.
2. The tire tread.
3. The lights.
4. The seat fabric.
The seat fabric.
If your motorcycle begins to wobble, you should:

1. Accelerate out of the wobble.
2. Use the brakes gradually.
3. Grip the handlebars firmly and close the throttle gradually.
4. Downshift.
Grip the handlebars firmly and close the throttle gradually.
When a vehicle attempts to pass you from behind, you should:

1. Move to the center portion of the lane.
2. Move to the left portion of the lane.
3. Move to the right portion of the lane.
4. Not be concerned about which portion of the lane you are using.
Move to the center portion of the lane.
Why should a load be placed low on a motorcycle?

1. If a load is too high, it raises the center of gravity.
2. If a load is too high, it may interfere with the turn signals.
3. It may be difficult to see over a load that is placed too high.
4. Others can't see your load if it is low.
If a load is too high, it raises the center of gravity.
Riding directly alongside another vehicle is discouraged because:

1. You may have a difficult time getting to a highway exit.
2. You may be in the other vehicle’s blind spot.
3. You may block the driver's view.
4. It prevents other drivers from passing both of you.
You may be in the other vehicle’s blind spot.
When riding in a group while passing another vehicle, it is best to:

1. Allow one rider to fully pass the other vehicle before another rider begins to pass.
2. Allow several members of the group to pass the other vehicle at once.
3. Have the last rider in the group wave to the driver being passed to signal that no other motorcycles are approaching.
4. Pass in a staggered formation.
Allow one rider to fully pass the other vehicle before another rider begins to pass.

Showing the first 10 terms. Use the flashcard player above to study all 30 terms!