2026 Kansas DMV HazMat Endorsement Test 2 (30 Questions And Complete Answers)
1 / 30
Terms in this set
30
An explosive material is most likely categorized as a ____ hazard.
1. Class 1
2. Class 3
3. Class 6
4. Class 7
1. Class 1
2. Class 3
3. Class 6
4. Class 7
Class 1
Emergency response information provided by the shipper must include:
1. Any risks of fire or explosion.
2. Value of the materials.
3. Driver information.
4. How many people should respond in the event of an accident.
1. Any risks of fire or explosion.
2. Value of the materials.
3. Driver information.
4. How many people should respond in the event of an accident.
Any risks of fire or explosion.
During a vehicle inspection, be sure that:
1. The emergency exits are difficult to open.
2. The emergency exit warning devices work properly.
3. The emergency exits squeak.
4. The emergency exits are not accessible from inside the cab.
1. The emergency exits are difficult to open.
2. The emergency exit warning devices work properly.
3. The emergency exits squeak.
4. The emergency exits are not accessible from inside the cab.
The emergency exit warning devices work properly.
When transporting Division 1.1 materials, the floor liner should be:
1. Made from metallic materials.
2. Made from an iron alloy.
3. Made from non-ferrous materials.
4. Loose.
1. Made from metallic materials.
2. Made from an iron alloy.
3. Made from non-ferrous materials.
4. Loose.
Made from non-ferrous materials.
Who is responsible for installing placards on a vehicle?
1. The shipper
2. The carrier
3. The driver
4. The mechanic
1. The shipper
2. The carrier
3. The driver
4. The mechanic
The driver
In general, when loading a tank with flammable liquids:
1. The engine should be running.
2. A ground should be established before opening the filling hole.
3. A ground should be broken right before opening the filling hole.
4. The filling hole should be locked during loading.
1. The engine should be running.
2. A ground should be established before opening the filling hole.
3. A ground should be broken right before opening the filling hole.
4. The filling hole should be locked during loading.
A ground should be established before opening the filling hole.
If there is a collision involving a vehicle transporting Class 1 explosives, the driver should:
1. Not warn others of the danger.
2. Allow smoking near the vehicle.
3. Keep the explosives inside the vehicle until after separating the vehicles involved in the collision.
4. Remove the explosives from the vehicle before separating the vehicles involved in the collision.
1. Not warn others of the danger.
2. Allow smoking near the vehicle.
3. Keep the explosives inside the vehicle until after separating the vehicles involved in the collision.
4. Remove the explosives from the vehicle before separating the vehicles involved in the collision.
Remove the explosives from the vehicle before separating the vehicles involved in the collision.
A person who is watching the loading or unloading of a tank must do all of the following, except:
1. Remain alert.
2. Remain within 25 feet of the tank.
3. Wear a chemical suit.
4. Know the hazards of the materials involved.
1. Remain alert.
2. Remain within 25 feet of the tank.
3. Wear a chemical suit.
4. Know the hazards of the materials involved.
Wear a chemical suit.
When performing a pre-trip inspection, you should make sure that:
1. The pedal surface has been smoothed out.
2. The gas pedal sticks.
3. Nothing is obstrucing the pedals.
4. There is something underneath the brake pedal.
1. The pedal surface has been smoothed out.
2. The gas pedal sticks.
3. Nothing is obstrucing the pedals.
4. There is something underneath the brake pedal.
Nothing is obstrucing the pedals.
How many hazardous materials classes are there?
1. Four
2. Six
3. Nine
4. Two
1. Four
2. Six
3. Nine
4. Two
Nine
Showing the first 10 terms. Use the flashcard player above to study all 30 terms!