2026 Iowa Permit DMV Test 9 (26 Questions And Complete Answers)
1 / 26
Terms in this set
26
To pass a slower-moving vehicle on a two-lane, two-way road, you must:
1. Not cross the centerline.
2. Flash your lights at oncoming traffic.
3. Use the shoulder.
4. Use the lane that belongs to oncoming traffic.
1. Not cross the centerline.
2. Flash your lights at oncoming traffic.
3. Use the shoulder.
4. Use the lane that belongs to oncoming traffic.
Use the lane that belongs to oncoming traffic.
A leaking exhaust system can:
1. Cause excessive oil use.
2. Require your vehicle to have a tune-up sooner than normal.
3. Make you drowsy while driving.
4. Set grass fires on country roads.
1. Cause excessive oil use.
2. Require your vehicle to have a tune-up sooner than normal.
3. Make you drowsy while driving.
4. Set grass fires on country roads.
Make you drowsy while driving.
Which of the following are used on some highways to direct drivers into the proper lanes for turning?
1. Flashing red lights
2. Flashing yellow lights
3. White lines on the side of the road
4. White arrows in the middle of the lanes
1. Flashing red lights
2. Flashing yellow lights
3. White lines on the side of the road
4. White arrows in the middle of the lanes
White arrows in the middle of the lanes
You are coming to a railroad crossing where the crossing signals are flashing. You should:
1. Stop and look for a train.
2. Slow down and look for a train.
3. Look for a train, then speed up.
4. Do what the vehicle ahead of you does.
1. Stop and look for a train.
2. Slow down and look for a train.
3. Look for a train, then speed up.
4. Do what the vehicle ahead of you does.
Stop and look for a train.
Stop lines are solid white lines painted across traffic lanes:
1. In curves and on hills.
2. Next to churches and schools.
3. At intersections and pedestrian crosswalks.
4. On freeway on-ramps.
1. In curves and on hills.
2. Next to churches and schools.
3. At intersections and pedestrian crosswalks.
4. On freeway on-ramps.
At intersections and pedestrian crosswalks.
Remove all snow, frost, and ice from:
1. Just the windshield.
2. All windows.
3. Just the windshield and passenger window.
1. Just the windshield.
2. All windows.
3. Just the windshield and passenger window.
All windows.
Prior to entering a curve:
1. Activate your turn signal.
2. Reduce your speed.
3. Brake hard.
1. Activate your turn signal.
2. Reduce your speed.
3. Brake hard.
Reduce your speed.
Tailgating other drivers (driving too closely to their rear bumper):
1. Can frustrate other drivers and make them angry.
2. Cannot result in a traffic citation.
3. Reduces collisions by preventing being "cut off."
1. Can frustrate other drivers and make them angry.
2. Cannot result in a traffic citation.
3. Reduces collisions by preventing being "cut off."
Can frustrate other drivers and make them angry.
What does a single dashed white line separating traffic mean?
1. Drivers may pass, even if it could be dangerous.
2. Lanes move in opposite directions.
3. Drivers may not pass.
4. Drivers may pass if it is safe to do so.
1. Drivers may pass, even if it could be dangerous.
2. Lanes move in opposite directions.
3. Drivers may not pass.
4. Drivers may pass if it is safe to do so.
Drivers may pass if it is safe to do so.
While driving, you come upon a sign displaying the words “Reduced speed, 35 mph." This means:
1. That the new 35 mph speed limit begins at this sign.
2. That the new 35 mph speed limit begins at the next speed limit sign.
3. That you have plenty of time to slow down before the reduced speed zone.
4. That you should reduce your speed to 35 mph, but only under poor weather conditions.
1. That the new 35 mph speed limit begins at this sign.
2. That the new 35 mph speed limit begins at the next speed limit sign.
3. That you have plenty of time to slow down before the reduced speed zone.
4. That you should reduce your speed to 35 mph, but only under poor weather conditions.
That the new 35 mph speed limit begins at this sign.
Showing the first 10 terms. Use the flashcard player above to study all 26 terms!