2026 Iowa DMV HazMat Endorsement Test 2 (30 Questions And Complete Answers)
1 / 30
Terms in this set
30
When loading compressed gas, the liquid discharge valves should be:
1. Closed.
2. Removed.
3. Opened.
1. Closed.
2. Removed.
3. Opened.
Opened.
A driver should ensure that:
1. The shipping paper matches the markings and labels on packages.
2. The shipping paper is written in code.
3. All packages are labeled as poison.
1. The shipping paper matches the markings and labels on packages.
2. The shipping paper is written in code.
3. All packages are labeled as poison.
The shipping paper matches the markings and labels on packages.
How often do hazardous materials employees need to be trained?
1. At least once a week
2. At least once every three years
3. At least one every 10 years
1. At least once a week
2. At least once every three years
3. At least one every 10 years
At least once every three years
To know which placard to use, you need to know:
1. The hazard class of the materials.
2. The type of container that is holding the materials.
3. The destination of the materials.
1. The hazard class of the materials.
2. The type of container that is holding the materials.
3. The destination of the materials.
The hazard class of the materials.
If you are transporting hazardous materials and the cargo is on fire, you should:
1. Try to put it out with a fire extinguisher.
2. Contact emergency personnel and let them battle the fire.
3. Hope the fire goes out by itself.
1. Try to put it out with a fire extinguisher.
2. Contact emergency personnel and let them battle the fire.
3. Hope the fire goes out by itself.
Contact emergency personnel and let them battle the fire.
When approaching a railroad crossing while transporting chlorine:'
1. You must stop before crossing the tracks.
2. You must reduce your speed before crossing the tracks.
3. You may proceed across the tracks without stopping if no warning lights are flashing.
1. You must stop before crossing the tracks.
2. You must reduce your speed before crossing the tracks.
3. You may proceed across the tracks without stopping if no warning lights are flashing.
You must stop before crossing the tracks.
The only way to effectively check your tire pressure is:
1. With a tire pressure gauge.
2. By eyeballing it.
3. By pushing on the tire to feel the pressure.
1. With a tire pressure gauge.
2. By eyeballing it.
3. By pushing on the tire to feel the pressure.
With a tire pressure gauge.
When loading hazardous materials, you should do all of the following, except:
1. Set the parking brake.
2. Load hazardous materials away from heat.
3. Use a hook.
1. Set the parking brake.
2. Load hazardous materials away from heat.
3. Use a hook.
Use a hook.
When carrying Division 1.1, 1.2, or 1.3 explosives, your vehicle should not be:
1. Parked within 300 feet of a bridge.
2. Parked within 40 feet of the road.
3. Driven in rain or snow.
1. Parked within 300 feet of a bridge.
2. Parked within 40 feet of the road.
3. Driven in rain or snow.
Parked within 300 feet of a bridge.
On a shipping paper describing both hazardous and non-hazardous materials, the hazardous materials may be identified by being:
1. Listed first.
2. Written in pencil.
3. Listed in red ink.
1. Listed first.
2. Written in pencil.
3. Listed in red ink.
Listed first.
Showing the first 10 terms. Use the flashcard player above to study all 30 terms!