2026 Indiana DMV Bus Endorsement Test 2 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
When asked to complete an offset back/right parking maneuver, you should:
1. Pull straight forward, then back to the right.
2. Pull straight forward, then back to the left.
3. Pull forward to the right, then back in a straight line.
4. Pull forward to the left, then back in a straight line.
1. Pull straight forward, then back to the right.
2. Pull straight forward, then back to the left.
3. Pull forward to the right, then back in a straight line.
4. Pull forward to the left, then back in a straight line.
Pull straight forward, then back to the right.
During a basic vehicle control skills test, what is considered a look?
1. Walking to the back of a vehicle to check its position
2. Using side mirrors to check a vehicle's position
3. Looking out of the driver's side window to check a vehicle's position
4. A driver glancing over their shoulder to check blind spots
1. Walking to the back of a vehicle to check its position
2. Using side mirrors to check a vehicle's position
3. Looking out of the driver's side window to check a vehicle's position
4. A driver glancing over their shoulder to check blind spots
Walking to the back of a vehicle to check its position
When entering traffic on an expressway during the skills test, you should:
1. Check for traffic.
2. Not use signals.
3. Abruptly enter a lane of traffic.
4. Cut off other drivers if needed.
1. Check for traffic.
2. Not use signals.
3. Abruptly enter a lane of traffic.
4. Cut off other drivers if needed.
Check for traffic.
When driving through a curve during the skills test, you should:
1. Veer from your lane if needed to complete the curve.
2. Reduce your speed after entering the curve.
3. Refrain from looking for other vehicles while turning.
4. Reduce your speed before entering the curve.
1. Veer from your lane if needed to complete the curve.
2. Reduce your speed after entering the curve.
3. Refrain from looking for other vehicles while turning.
4. Reduce your speed before entering the curve.
Reduce your speed before entering the curve.
An active railroad crossing:
1. Has a traffic control device installed at the crossing.
2. Does not have any traffic control devices installed at the crossing.
3. Is characterized by having at least 10 vehicles cross the tracks every hour.
4. Should be avoided.
1. Has a traffic control device installed at the crossing.
2. Does not have any traffic control devices installed at the crossing.
3. Is characterized by having at least 10 vehicles cross the tracks every hour.
4. Should be avoided.
Has a traffic control device installed at the crossing.
When performing the stop/start maneuver as a part of the skills test, you should:
1. Cut off other vehicles if needed to get onto the shoulder.
2. Not use any turn signals.
3. Slam on the brakes to stop as quickly as possible.
4. Decelerate smoothly.
1. Cut off other vehicles if needed to get onto the shoulder.
2. Not use any turn signals.
3. Slam on the brakes to stop as quickly as possible.
4. Decelerate smoothly.
Decelerate smoothly.
The overhead inside rearview mirror:
1. Allows the driver to see what is happening inside of the bus.
2. Allows the driver to see what is happening outside of the bus.
3. Monitors traffic.
4. Opens and closes the door.
1. Allows the driver to see what is happening inside of the bus.
2. Allows the driver to see what is happening outside of the bus.
3. Monitors traffic.
4. Opens and closes the door.
Allows the driver to see what is happening inside of the bus.
When alley docking, your vehicle should be parked:
1. With the front bumper on top of the front boundary line.
2. With the rear wheels over the rear boundary line.
3. Straight within the boundaries of the parking space.
4. At an angle within the boundaries of the parking space.
1. With the front bumper on top of the front boundary line.
2. With the rear wheels over the rear boundary line.
3. Straight within the boundaries of the parking space.
4. At an angle within the boundaries of the parking space.
Straight within the boundaries of the parking space.
Properly adjusted outside convex mirrors should allow the driver to see:
1. The entire side of the bus up to the mirror mounts.
2. The front of the bus.
3. The rear door of the bus.
4. The top of the bus.
1. The entire side of the bus up to the mirror mounts.
2. The front of the bus.
3. The rear door of the bus.
4. The top of the bus.
The entire side of the bus up to the mirror mounts.
If a bus is equipped with outside convex mirrors, they will be located:'
1. Below the outside flat mirrors.
2. Above the outside flat mirrors.
3. Next to the door.
4. On top of the bus.
1. Below the outside flat mirrors.
2. Above the outside flat mirrors.
3. Next to the door.
4. On top of the bus.
Below the outside flat mirrors.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!