2026 Illinois DMV Bus Endorsement Test 1 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
When stopping to pick up students, a bus driver should:
1. Place the vehicle in park.
2. Place the vehicle in first gear.
3. Place the vehicle in reverse.
4. Place the vehicle in third gear.
1. Place the vehicle in park.
2. Place the vehicle in first gear.
3. Place the vehicle in reverse.
4. Place the vehicle in third gear.
Place the vehicle in park.
The loading of a school bus:
1. Is not a dangerous process.
2. Does not need to be supervised.
3. Should be done quickly.
4. Can be dangerous.
1. Is not a dangerous process.
2. Does not need to be supervised.
3. Should be done quickly.
4. Can be dangerous.
Can be dangerous.
When conducting a vehicle inspection, you must show each of the following, except:
1. That the oil pressure gauge is working.
2. That the oil pressure warning light turns off, or that the gauge shows increasing or normal oil pressure.
3. That the oil temperature gauge, if equipped, rises to the normal operating range.
4. That the oil pressure gauge comes on when brakes are used.
1. That the oil pressure gauge is working.
2. That the oil pressure warning light turns off, or that the gauge shows increasing or normal oil pressure.
3. That the oil temperature gauge, if equipped, rises to the normal operating range.
4. That the oil pressure gauge comes on when brakes are used.
That the oil pressure gauge comes on when brakes are used.
What happens if a driver exceeds the number of permitted looks during any particular exercise?
1. They must restart the exercise.
2. They will automatically fail the basic vehicle control skills test.
3. They will fail only that particular exercise.
4. Three points will be marked against their test score.
1. They must restart the exercise.
2. They will automatically fail the basic vehicle control skills test.
3. They will fail only that particular exercise.
4. Three points will be marked against their test score.
They will automatically fail the basic vehicle control skills test.
If asked to sight-side back your vehicle into an alley, you should first:
1. Pull directly into the alley parking space.
2. Turn your vehicle to the right to position yourself directly in front of the alley.
3. Pull past the alley and stop perpendicular to the outer boundary.
4. Pull past the alley and stop parallel to the outer boundary.
1. Pull directly into the alley parking space.
2. Turn your vehicle to the right to position yourself directly in front of the alley.
3. Pull past the alley and stop perpendicular to the outer boundary.
4. Pull past the alley and stop parallel to the outer boundary.
Pull past the alley and stop parallel to the outer boundary.
What should properly adjusted outside side flat mirrors on a school bus allow the driver to see?
1. The sides of the school bus
2. Under the school bus
3. The front tires touching the ground
4. Vehicles in front of the bus
1. The sides of the school bus
2. Under the school bus
3. The front tires touching the ground
4. Vehicles in front of the bus
The sides of the school bus
During exercises that are not the straight line backing exercise, you may exit your vehicle to check its position no more than:
1. One time.
2. Two times.
3. Three times.
4. Four times.
1. One time.
2. Two times.
3. Three times.
4. Four times.
Two times.
When inspecting engine compartment belts during the vehicle inspection test:
1. The belts should be checked for snugness, each with up to three inches of play.
2. The air compressor belt should be removed.
3. The water pump belt does not need to be identified.
4. The applicant must identify which items are not belt-driven, if any.
1. The belts should be checked for snugness, each with up to three inches of play.
2. The air compressor belt should be removed.
3. The water pump belt does not need to be identified.
4. The applicant must identify which items are not belt-driven, if any.
The applicant must identify which items are not belt-driven, if any.
An active railroad crossing:
1. Has a traffic control device installed at the crossing.
2. Does not have any traffic control devices installed at the crossing.
3. Is characterized by having at least 10 vehicles cross the tracks every hour.
4. Should be avoided.
1. Has a traffic control device installed at the crossing.
2. Does not have any traffic control devices installed at the crossing.
3. Is characterized by having at least 10 vehicles cross the tracks every hour.
4. Should be avoided.
Has a traffic control device installed at the crossing.
Buses may carry:
1. Small arms ammunition.
2. Corrosive materials.
3. Poison gas.
4. Explosives other than small arms ammunition.
1. Small arms ammunition.
2. Corrosive materials.
3. Poison gas.
4. Explosives other than small arms ammunition.
Small arms ammunition.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!