2026 Idaho DMV Permit Test 8 (32 Questions And Complete Answers)
1 / 32
Terms in this set
32
Increasing your vehicle’s speed:
1. Increases your field of vision.
2. Decreases your field of vision.
3. Makes it easier to see cross traffic.
4. Has no effect on your field of vision.
1. Increases your field of vision.
2. Decreases your field of vision.
3. Makes it easier to see cross traffic.
4. Has no effect on your field of vision.
Decreases your field of vision.
Pentagonal signs indicate:
1. No passing zones.
2. School zones.
3. Speed limits.
4. Railroad crossings.
1. No passing zones.
2. School zones.
3. Speed limits.
4. Railroad crossings.
School zones.
Regulatory signs:
1. Are placed in every location where there is a present danger.
2. Indicate what a driver must or must not do.
3. Are diamond-shaped and yellow or green.
4. May warn drivers that they are approaching a school zone.
1. Are placed in every location where there is a present danger.
2. Indicate what a driver must or must not do.
3. Are diamond-shaped and yellow or green.
4. May warn drivers that they are approaching a school zone.
Indicate what a driver must or must not do.
When driving in Idaho, you must:
1. Always drive at the maximum posted speed limit.
2. Drive at a speed that is reasonable and prudent at all times.
3. Drive 10 mph below the posted speed limit at all times.
4. Always drive at the same speed as the vehicles around you.
1. Always drive at the maximum posted speed limit.
2. Drive at a speed that is reasonable and prudent at all times.
3. Drive 10 mph below the posted speed limit at all times.
4. Always drive at the same speed as the vehicles around you.
Drive at a speed that is reasonable and prudent at all times.
An octagonal sign is always a:
1. Speed limit sign.
2. Stop sign.
3. Hospital sign.
4. Railroad warning sign.
1. Speed limit sign.
2. Stop sign.
3. Hospital sign.
4. Railroad warning sign.
Stop sign.
Is it legal cross a double solid yellow centerline to pass?
1. Yes.
2. No.
3. If there is no oncoming traffic.
4. If the vehicle ahead of you is driving under the speed limit.
1. Yes.
2. No.
3. If there is no oncoming traffic.
4. If the vehicle ahead of you is driving under the speed limit.
No.
Railroad crossings should always be considered:
1. Safe to cross, as it is unlikely that a train will be coming.
2. Dangerous.
3. Safe locations to park a car.
4. A place where it is required to stop
1. Safe to cross, as it is unlikely that a train will be coming.
2. Dangerous.
3. Safe locations to park a car.
4. A place where it is required to stop
Dangerous.
Another driver is trying to pass your car. You should:
1. Pull off the road.
2. Signal to the other driver when it is safe for them to pass.
3. Check for oncoming traffic and adjust your speed to allow safe passing.
4. Speed up.
1. Pull off the road.
2. Signal to the other driver when it is safe for them to pass.
3. Check for oncoming traffic and adjust your speed to allow safe passing.
4. Speed up.
Check for oncoming traffic and adjust your speed to allow safe passing.
You are coming to a railroad crossing where the crossing signals are flashing. You should:
1. Stop and look for a train.
2. Slow down and look for a train.
3. Look for a train, then speed up.
4. Do what the vehicle ahead of you does.
1. Stop and look for a train.
2. Slow down and look for a train.
3. Look for a train, then speed up.
4. Do what the vehicle ahead of you does.
Stop and look for a train.
When driving near a blind pedestrian who is carrying a white cane or using a guide dog, you should:
1. Slow down and be prepared to stop.
2. Take the right-of-way.
3. Proceed normally.
4. Drive away quickly.
1. Slow down and be prepared to stop.
2. Take the right-of-way.
3. Proceed normally.
4. Drive away quickly.
Slow down and be prepared to stop.
Showing the first 10 terms. Use the flashcard player above to study all 32 terms!