2026 Idaho DMV Permit Test 21 (28 Questions And Complete Answers)
1 / 28
Terms in this set
28
Braking distance is affected by:
1. The speed your vehicle is traveling.
2. The condition of your brakes and tires.
3. The condition of the pavement.
4. All of the above.
1. The speed your vehicle is traveling.
2. The condition of your brakes and tires.
3. The condition of the pavement.
4. All of the above.
All of the above.
A leaky exhaust system in your vehicle is dangerous because it can cause:
1. A loss of hearing.
2. Pollution.
3. Carbon monoxide poisoning.
4. Poor engine performance.
1. A loss of hearing.
2. Pollution.
3. Carbon monoxide poisoning.
4. Poor engine performance.
Carbon monoxide poisoning.
When changing lanes, you should:
1. Rely on your mirrors.
2. Begin signaling as you move into the next lane.
3. Signal at least 500 feet before your lane change when driving on residential streets.
4. Always check your blind spot.
1. Rely on your mirrors.
2. Begin signaling as you move into the next lane.
3. Signal at least 500 feet before your lane change when driving on residential streets.
4. Always check your blind spot.
Always check your blind spot.
Your tire blows out while you are driving. You should:
1. Slam on your brakes.
2. Hold your steering wheel tightly and slow to a stop.
3. Keep driving normally.
4. Turn on your emergency flashers and continue driving.
1. Slam on your brakes.
2. Hold your steering wheel tightly and slow to a stop.
3. Keep driving normally.
4. Turn on your emergency flashers and continue driving.
Hold your steering wheel tightly and slow to a stop.
When driving to an unfamiliar area, you:
1. Should depend on road signs to find your way.
2. Should plan your trip in advance.
3. Only have to know generally where your destination is.
4. Should always choose the most direct route.
1. Should depend on road signs to find your way.
2. Should plan your trip in advance.
3. Only have to know generally where your destination is.
4. Should always choose the most direct route.
Should plan your trip in advance.
What should you do if your vehicle’s right wheels leave the pavement?
1. Stop quickly.
2. Immediately pull all the way off of the road and get back on when it is safe.
3. Accelerate and steer back on the road quickly.
4. Take your foot off the accelerator, slow down, then ease back onto the road when it is safe to do so.
1. Stop quickly.
2. Immediately pull all the way off of the road and get back on when it is safe.
3. Accelerate and steer back on the road quickly.
4. Take your foot off the accelerator, slow down, then ease back onto the road when it is safe to do so.
Take your foot off the accelerator, slow down, then ease back onto the road when it is safe to do so.
When driving on slick roads, you should:
1. Take turns more slowly than usual.
2. Change lanes quickly.
3. Accelerate quickly.
4. Brake hard.
1. Take turns more slowly than usual.
2. Change lanes quickly.
3. Accelerate quickly.
4. Brake hard.
Take turns more slowly than usual.
The best way to avoid hydroplaning is to:
1. Keep your tires properly maintained.
2. Slow down when roads are wet or slushy.
3. Watch out for standing water or puddles.
4. All of the above.
1. Keep your tires properly maintained.
2. Slow down when roads are wet or slushy.
3. Watch out for standing water or puddles.
4. All of the above.
All of the above.
You may avoid the risks of alcohol-related crashes by:
1. Deciding before you start drinking that you are not going to drive.
2. Simply saying, "No thanks, I'm driving," if someone offers you a drink.
3. Calling a taxi.
4. Doing any of the above.
1. Deciding before you start drinking that you are not going to drive.
2. Simply saying, "No thanks, I'm driving," if someone offers you a drink.
3. Calling a taxi.
4. Doing any of the above.
Doing any of the above.
If you reach an intersection where you wish to turn but you are not in the proper lane, you should:
1. Quickly cut across traffic to make your turn.
2. Turn on your blinker and make the turn from your current lane.
3. Drive to the next intersection and make your turn then.
4. Safely change lanes then put your vehicle in reverse to go back to the intersection.
1. Quickly cut across traffic to make your turn.
2. Turn on your blinker and make the turn from your current lane.
3. Drive to the next intersection and make your turn then.
4. Safely change lanes then put your vehicle in reverse to go back to the intersection.
Drive to the next intersection and make your turn then.
Showing the first 10 terms. Use the flashcard player above to study all 28 terms!