2026 Hawaii DMV Bus Endorsement Test 2 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
Bus stops may be changed by:
1. The driver.
2. Parents.
3. The school district.
1. The driver.
2. Parents.
3. The school district.
The school district.
The inside rearview mirror is used to:
1. See passengers.
2. See potential hazards on the road.
3. See vehicles trying to switch lanes.
1. See passengers.
2. See potential hazards on the road.
3. See vehicles trying to switch lanes.
See passengers.
When operating a school bus, mirrors should be adjusted:
1. During the drive.
2. Before beginning to drive.
3. After the drive is completed.
1. During the drive.
2. Before beginning to drive.
3. After the drive is completed.
Before beginning to drive.
If a gate controlling a railroad crossing does not go back up after a train passes, you should:
1. Drive around the gate.
2. Wait for another vehicle to cross the tracks first to see if it is safe.
3. Call your dispatcher.
1. Drive around the gate.
2. Wait for another vehicle to cross the tracks first to see if it is safe.
3. Call your dispatcher.
Call your dispatcher.
If your bus is equipped with a roof-mounted strobe light, it should be used:
1. In times of limited visibility.
2. All the time.
3. Only at night.
1. In times of limited visibility.
2. All the time.
3. Only at night.
In times of limited visibility.
To safely unload a bus, students should:
1. Remain seated until they are told to exit.
2. Stand up and head toward the door while the bus is slowing down.
3. Exit the bus and stand directly next to the bus while it is being driven away from the stop.
1. Remain seated until they are told to exit.
2. Stand up and head toward the door while the bus is slowing down.
3. Exit the bus and stand directly next to the bus while it is being driven away from the stop.
Remain seated until they are told to exit.
When making a stop to pick up students, a driver should ensure all surrounding traffic has stopped before:
1. Opening the door and signaling for the students to approach.
2. Turning on the alternating red lights.
3. Pulling over to the side of the road.
1. Opening the door and signaling for the students to approach.
2. Turning on the alternating red lights.
3. Pulling over to the side of the road.
Opening the door and signaling for the students to approach.
During the driving test, when encountering a railroad crossing, you should:
1. Pass another vehicle on the tracks if the other vehicle is going too slow.
2. Get out of the vehicle to check for a train.
3. Not change gears while your vehicle is on the tracks.
1. Pass another vehicle on the tracks if the other vehicle is going too slow.
2. Get out of the vehicle to check for a train.
3. Not change gears while your vehicle is on the tracks.
Not change gears while your vehicle is on the tracks.
During the driving test, the examiner will be scoring you on:
1. Attitude.
2. How quickly you arrive to your destination.
3. Your general driving behavior.
1. Attitude.
2. How quickly you arrive to your destination.
3. Your general driving behavior.
Your general driving behavior.
When stopping to pick up students, be sure to park at least 10 feet away from the students because:
1. You will have a good view of their movements.
2. It will be difficult to get any closer to the students.
3. Students should walk for exercise.
1. You will have a good view of their movements.
2. It will be difficult to get any closer to the students.
3. Students should walk for exercise.
You will have a good view of their movements.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!