2026 Free Colorado DMV Double Endorsement Test 2 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
If driving a vehicle with a manual transmission, you can prevent your vehicle from rolling backward when starting from a stop by:
1. Partly engaging the clutch before removing your foot from the brake pedal.
2. Placing the vehicle in reverse before moving forward.
3. Fully engaging the clutch before removing your foot from the brake pedal.
4. Placing the vehicle in neutral before moving forward.
1. Partly engaging the clutch before removing your foot from the brake pedal.
2. Placing the vehicle in reverse before moving forward.
3. Fully engaging the clutch before removing your foot from the brake pedal.
4. Placing the vehicle in neutral before moving forward.
Partly engaging the clutch before removing your foot from the brake pedal.
If an approaching driver is using their high beam headlights, you should:
1. Look directly at the headlights.
2. Flash your high beam lights to remind the driver to switch to their low beams.
3. Look to the right side of your lane until the vehicle has passed.
4. Pull to the side of the road until the vehicle has passed.
1. Look directly at the headlights.
2. Flash your high beam lights to remind the driver to switch to their low beams.
3. Look to the right side of your lane until the vehicle has passed.
4. Pull to the side of the road until the vehicle has passed.
Look to the right side of your lane until the vehicle has passed.
Hydraulic brakes can fail for one of two reasons. Which of the following is one of those reasons?
1. There is a loss of hydraulic pressure.
2. You are driving uphill.
3. The brakes get too cold.
4. The brakes are used too much in one day.
1. There is a loss of hydraulic pressure.
2. You are driving uphill.
3. The brakes get too cold.
4. The brakes are used too much in one day.
There is a loss of hydraulic pressure.
Starting in which year were newly manufactured trailers required to have ABS?
1. 1972
2. 1987
3. 1998
4. 2004
1. 1972
2. 1987
3. 1998
4. 2004
1998
An Anti-Lock Braking System (ABS):
1. Allows wheels to lock up.
2. Prevents wheels from locking up.
3. Makes it easier to turn a large vehicle.
4. Assists with the operation of brake lights.
1. Allows wheels to lock up.
2. Prevents wheels from locking up.
3. Makes it easier to turn a large vehicle.
4. Assists with the operation of brake lights.
Prevents wheels from locking up.
Proper coupling technique:
1. Is the same on all vehicles.
2. Is essential to the safe operation of a vehicle.
3. Includes ensuring that the fifth wheel plate is not greased.
4. Can be learned over time.
1. Is the same on all vehicles.
2. Is essential to the safe operation of a vehicle.
3. Includes ensuring that the fifth wheel plate is not greased.
4. Can be learned over time.
Is essential to the safe operation of a vehicle.
Which of the following is not an indication of damaged brakes?
1. Cracked drums
2. Shoes with oil or grease on them
3. Shoes worn thinly
4. Pads free of oil or grease
1. Cracked drums
2. Shoes with oil or grease on them
3. Shoes worn thinly
4. Pads free of oil or grease
Pads free of oil or grease
To confirm that a trailer has ABS, you can:
1. Look under the trailer for wheel speed sensors coming from the back of the brakes.
2. Look under the hood for the ABS sticker.
3. Look at the tires.
4. Remove a tire and look for the ABS sensor on the axle.
1. Look under the trailer for wheel speed sensors coming from the back of the brakes.
2. Look under the hood for the ABS sticker.
3. Look at the tires.
4. Remove a tire and look for the ABS sensor on the axle.
Look under the trailer for wheel speed sensors coming from the back of the brakes.
If the air pressure warning light comes on, you should:
1. Continue driving normally.
2. Activate your hazard lights and continue driving.
3. Call the local law enforcement agency.
4. Safely exit the roadway and stop.
1. Continue driving normally.
2. Activate your hazard lights and continue driving.
3. Call the local law enforcement agency.
4. Safely exit the roadway and stop.
Safely exit the roadway and stop.
Steering that feels heavy is often a sign of:
1. Rear tire failure.
2. Front tire failure.
3. A shifting load.
4. The coolant overheating.
1. Rear tire failure.
2. Front tire failure.
3. A shifting load.
4. The coolant overheating.
Front tire failure.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!