2026 Free Colorado DMV Bus Endorsement Test 2 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
There are blind spots ____ left and right side flat mirrors.
1. Immediately below
2. In the middle of
3. Above
4. To the left of
1. Immediately below
2. In the middle of
3. Above
4. To the left of
Immediately below
When stopping to pick up students, a bus driver should:
1. Place the vehicle in park.
2. Place the vehicle in third gear.
3. Place the vehicle in first gear.
4. Place the vehicle in reverse.
1. Place the vehicle in park.
2. Place the vehicle in third gear.
3. Place the vehicle in first gear.
4. Place the vehicle in reverse.
Place the vehicle in park.
During a basic vehicle control skills test, you may be asked to:
1. Parallel park.
2. Inspect your tires.
3. Monitor your gauges.
4. Pull forward into a parking space.
1. Parallel park.
2. Inspect your tires.
3. Monitor your gauges.
4. Pull forward into a parking space.
Parallel park.
When taking the on-road driving test, you will be evaluated on your lane usage. Which of the following is an example of poor lane usage?
1. Not driving over curbs or sidewalks
2. Stopping behind crosswalks
3. Driving in the leftmost lane if more than one driving lane is available
4. Finishing a right turn in the rightmost lane
1. Not driving over curbs or sidewalks
2. Stopping behind crosswalks
3. Driving in the leftmost lane if more than one driving lane is available
4. Finishing a right turn in the rightmost lane
Driving in the leftmost lane if more than one driving lane is available
When alley docking, your vehicle should be parked:
1. With the front bumper on top of the front boundary line.
2. With the rear wheels over the rear boundary line.
3. Straight within the boundaries of the parking space.
4. At an angle within the boundaries of the parking space.
1. With the front bumper on top of the front boundary line.
2. With the rear wheels over the rear boundary line.
3. Straight within the boundaries of the parking space.
4. At an angle within the boundaries of the parking space.
Straight within the boundaries of the parking space.
Before evacuating a bus in response to a hazard, a driver should:
1. Ask the students if they want to leave.
2. Explain the hazard to the dispatcher and make a decision on how to respond.
3. Tell students to panic.
4. Have students open all the windows.
1. Ask the students if they want to leave.
2. Explain the hazard to the dispatcher and make a decision on how to respond.
3. Tell students to panic.
4. Have students open all the windows.
Explain the hazard to the dispatcher and make a decision on how to respond.
During the steering box portion of the vehicle inspection test, you should not:
1. Ensure that the steering box is securely mounted.
2. Ensure that the steering box is free of leaks.
3. Look for missing bolts in the steering box.
4. Assume all cotter keys are present.
1. Ensure that the steering box is securely mounted.
2. Ensure that the steering box is free of leaks.
3. Look for missing bolts in the steering box.
4. Assume all cotter keys are present.
Assume all cotter keys are present.
While students load and unload a bus, the driver should:
1. Read a book.
2. Watch the process and keep an eye on the students.
3. Talk to other bus drivers.
4. Listen to the radio.
1. Read a book.
2. Watch the process and keep an eye on the students.
3. Talk to other bus drivers.
4. Listen to the radio.
Watch the process and keep an eye on the students.
The overhead inside mirror should be adjusted to see:
1. Outside of the driver’s side of the bus.
2. All of the students on the bus.
3. Students in the first four rows of the bus.
4. In front of the bus.
1. Outside of the driver’s side of the bus.
2. All of the students on the bus.
3. Students in the first four rows of the bus.
4. In front of the bus.
All of the students on the bus.
Properly adjusted outside convex mirrors should allow the driver to see:
1. Where the front of each rear tire touches the ground.
2. Where the front of each front tire touches the ground.
3. The top of the bus.
4. The muffler.
1. Where the front of each rear tire touches the ground.
2. Where the front of each front tire touches the ground.
3. The top of the bus.
4. The muffler.
Where the front of each rear tire touches the ground.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!