2026 Free Alabama DMV CDL Bus Test 1 (20 Questions And Complete Answers)
1 / 20
Terms in this set
20
When alley docking, you should first:
1. Position your vehicle directly in front of the alley.
2. Back up directly in front of the alley.
3. Stop parallel to the outer boundary of the alley.
1. Position your vehicle directly in front of the alley.
2. Back up directly in front of the alley.
3. Stop parallel to the outer boundary of the alley.
Stop parallel to the outer boundary of the alley.
During a basic vehicle control skills test, you may be asked to:
1. Swerve to avoid a hazard.
2. Parallel park.
3. Drive straight into a parking space.
1. Swerve to avoid a hazard.
2. Parallel park.
3. Drive straight into a parking space.
Parallel park.
During a basic vehicle control skills test, you may be asked to:
1. Parallel park.
2. Inspect your tires.
3. Monitor your gauges.
4. Pull forward into a parking space.
1. Parallel park.
2. Inspect your tires.
3. Monitor your gauges.
4. Pull forward into a parking space.
Parallel park.
When taking the on-road driving test, you must do all of the following, except:
1. Wear your safety belt.
2. Obey all traffic signs.
3. Complete the test without an accident.
4. Demonstrate that you can use your cell phone while driving.
1. Wear your safety belt.
2. Obey all traffic signs.
3. Complete the test without an accident.
4. Demonstrate that you can use your cell phone while driving.
Demonstrate that you can use your cell phone while driving.
When exiting your vehicle, you:
1. Must maintain four points of contact with the vehicle.
2. May turn to face the road before your exit is complete.
3. Must be facing away from the vehicle.
4. Must be facing the vehicle.
1. Must maintain four points of contact with the vehicle.
2. May turn to face the road before your exit is complete.
3. Must be facing away from the vehicle.
4. Must be facing the vehicle.
Must be facing the vehicle.
When operating a school bus, mirrors should be adjusted:
1. During the drive.
2. Before beginning to drive.
3. After the drive is completed.
1. During the drive.
2. Before beginning to drive.
3. After the drive is completed.
Before beginning to drive.
When taking the on-road driving skills test, you will be evaluated on your gear usage. You should not:
1. Avoid grinding or clashing gears.
2. Select a gear that does not rev the engine.
3. Forget to shift through an intersection.
4. Shift while taking a turn.
1. Avoid grinding or clashing gears.
2. Select a gear that does not rev the engine.
3. Forget to shift through an intersection.
4. Shift while taking a turn.
Shift while taking a turn.
Which of the following is not a backing maneuver that you will be asked to perform during the basic control skills test?
1. Straight line backing
2. Offset back/right
3. Offset back/left
4. Blind offset
1. Straight line backing
2. Offset back/right
3. Offset back/left
4. Blind offset
Blind offset
When asked to make a lane change during the driving test, you should:
1. Make the change as soon as the examiner asks, without looking.
2. Use your turn signal and change lanes when safe.
3. Make the lane change as quickly as possible, even if that means cutting off another driver.
1. Make the change as soon as the examiner asks, without looking.
2. Use your turn signal and change lanes when safe.
3. Make the lane change as quickly as possible, even if that means cutting off another driver.
Use your turn signal and change lanes when safe.
While students load and unload a bus, the driver should:
1. Read a book.
2. Watch the process and keep an eye on the students.
3. Talk to other bus drivers.
4. Listen to the radio.
1. Read a book.
2. Watch the process and keep an eye on the students.
3. Talk to other bus drivers.
4. Listen to the radio.
Watch the process and keep an eye on the students.
Showing the first 10 terms. Use the flashcard player above to study all 20 terms!