2026 Florida DMV Permit Test 12 (41 Questions And Complete Answers)

DMV 41 Terms | 2026 Florida DMV Permit Test 12 (41 Questions And Complete Answers)
1 / 41
Terms in this set 41
What does a single dashed yellow line separating traffic mean?

1. Drivers may pass if it is safe to do so.
2. Both lanes travel in the same direction.
3. Drivers may not pass.
4. Drivers may pass, even if it could be dangerous.
Drivers may pass if it is safe to do so.
When merging onto a freeway, it is usually best to:

1. Proceed slowly while waiting for an opening.
2. Accelerate to a speed that is faster than the speed of traffic.
3. Turn on your hazard lights until safely on the freeway.
4. Accelerate to the speed of freeway traffic.
Accelerate to the speed of freeway traffic.
Low beam headlights are effective for vehicles driving at speeds of up to:

1. 10 mph.
2. 25 mph.
3. 50 mph.
4. 70 mph.
25 mph.
What is the first thing you should adjust, if needed, when you get into a car to drive?

1. Your seat belt
2. The steering wheel
3. Your rearview mirror
4. Your seat
Your seat
This is a ____ sign.'

1. Stop
2. Wrong way
3. Yield
4. Do not enter
Yield
An arrow painted on the pavement means:

1. Drivers in the proper lane may make the movement indicated by the arrow, if they choose to do so.
2. Drivers in the proper lane must make the movement indicated by the arrow, but only if traffic lights are not working.
3. Drivers in the proper lane must always come to a complete stop before making the movement indicated by the arrow.
4. Drivers in the proper lane must make the movement indicated by the arrow while following directions indicated by traffic signals.
Drivers in the proper lane must make the movement indicated by the arrow while following directions indicated by traffic signals.
When a traffic signal light turns green, you should:

1. Yield the right-of-way to pedestrians.
2. Accelerate as quickly as possible.
3. Back up slowly.
4. Not move until another driver waves you on.
Yield the right-of-way to pedestrians.
When approaching a railroad crossing warning sign:

1. Be ready to drive faster than the train.
2. Be prepared to stop if a train is nearby.
3. Look for a way around any lowered gates.
4. Assume no trains are nearby and continue driving normally.
Be prepared to stop if a train is nearby.
At an intersection with a stop sign, you should stop and:

1. Check your rearview mirror for cars tailgating.
2. Move when the vehicle ahead of you moves.
3. Look right first, then left, then right again.
4. Look left first, then right, then left again.
Look left first, then right, then left again.
An intersection has no traffic signs or signals. You arrive at the same time as a vehicle to your right. You should:

1. Speed up and get through the intersection.
2. Slow down and yield to the vehicle on your right.
3. Drive into the intersection and make the other vehicle stop.
4. Honk your horn and drive through the intersection.
Slow down and yield to the vehicle on your right.

Showing the first 10 terms. Use the flashcard player above to study all 41 terms!