2026 Florida DMV Knowledge Test Class A Test 1 (50 Questions And Complete Answers)
1 / 50
Terms in this set
50
When checking its automatic transmission fluid, the vehicle:
1. Should be placed on an incline.
2. Should be placed on a decline.
3. May have to be running.
4. Should be lifted with a jack.
1. Should be placed on an incline.
2. Should be placed on a decline.
3. May have to be running.
4. Should be lifted with a jack.
May have to be running.
If driving a truck that requires a CDL for operation:
1. You are required to wear a seat belt, but only if transporting more than 500 pounds of cargo.
2. You do not need to wear a seat belt.
3. You are always required to wear a seat belt.
4. You are only required to wear a seat belt when driving a tank trailer.
1. You are required to wear a seat belt, but only if transporting more than 500 pounds of cargo.
2. You do not need to wear a seat belt.
3. You are always required to wear a seat belt.
4. You are only required to wear a seat belt when driving a tank trailer.
You are always required to wear a seat belt.
Header boards:
1. Should never be used.
2. Protect the driver from being hit by cargo.
3. Protect the driver's head when entering the cab of a truck.
4. Provide extra storage.
1. Should never be used.
2. Protect the driver from being hit by cargo.
3. Protect the driver's head when entering the cab of a truck.
4. Provide extra storage.
Protect the driver from being hit by cargo.
For safety purposes, when should you turn off a retarder?
1. When the roadways are slippery
2. When you are carrying a passenger
3. When you are carrying a heavy load
4. When driving in heavy traffic
1. When the roadways are slippery
2. When you are carrying a passenger
3. When you are carrying a heavy load
4. When driving in heavy traffic
When the roadways are slippery
In a newer vehicle, you apply the parking brake:
1. By using a diamond-shaped yellow knob.
2. By using a round red knob.
3. By using a square green knob.
4. By using a black round knob.
1. By using a diamond-shaped yellow knob.
2. By using a round red knob.
3. By using a square green knob.
4. By using a black round knob.
By using a diamond-shaped yellow knob.
If federal inspectors judge your vehicle to be unsafe, they can:
1. Bring you to a garage to have your vehicle fixed.
2. Formerly request that you have your vehicle's problems fixed.
3. Call a mechanic.
4. Pull the vehicle out-of-service until it is fixed.
1. Bring you to a garage to have your vehicle fixed.
2. Formerly request that you have your vehicle's problems fixed.
3. Call a mechanic.
4. Pull the vehicle out-of-service until it is fixed.
Pull the vehicle out-of-service until it is fixed.
If driving a school bus, your four-way flashers should:
1. Be activated before crossing railroad tracks.
2. Never be used.
3. Only be used after crossing railroad tracks.
4. Only be used near railroad tracks if a train is approaching.
1. Be activated before crossing railroad tracks.
2. Never be used.
3. Only be used after crossing railroad tracks.
4. Only be used near railroad tracks if a train is approaching.
Be activated before crossing railroad tracks.
If equipped, a header board should:
1. Be damaged.
2. Be loose.
3. Be strong enough to contain cargo.
4. Light up when the engine is started.
1. Be damaged.
2. Be loose.
3. Be strong enough to contain cargo.
4. Light up when the engine is started.
Be strong enough to contain cargo.
If an approaching driver is using their high beam headlights, you should:
1. Look directly at the headlights.
2. Flash your high beam lights to remind the driver to switch to their low beams.
3. Look to the right side of your lane until the vehicle has passed.
4. Pull to the side of the road until the vehicle has passed.
1. Look directly at the headlights.
2. Flash your high beam lights to remind the driver to switch to their low beams.
3. Look to the right side of your lane until the vehicle has passed.
4. Pull to the side of the road until the vehicle has passed.
Look to the right side of your lane until the vehicle has passed.
What is a Gross Vehicle Weight Rating?
1. The maximum weight stated by the manufacturer as the loaded weight of a single vehicle
2. The maximum weight that can be pulled by a single vehicle
3. The minimum weight that can be hauled by a single vehicle
4. The maximum amount that can be loaded onto a single trailer
1. The maximum weight stated by the manufacturer as the loaded weight of a single vehicle
2. The maximum weight that can be pulled by a single vehicle
3. The minimum weight that can be hauled by a single vehicle
4. The maximum amount that can be loaded onto a single trailer
The maximum weight stated by the manufacturer as the loaded weight of a single vehicle
Showing the first 10 terms. Use the flashcard player above to study all 50 terms!