2026 District Of Columbia Motorcycle DMV Permit Test 16 (25 Questions And Complete Answers)
1 / 25
Terms in this set
25
Riding directly alongside another vehicle is discouraged because:
1. You may have a difficult time getting to a highway exit.
2. You may be in the other vehicle’s blind spot.
3. You may block the driver's view.
4. It prevents other drivers from passing both of you.
1. You may have a difficult time getting to a highway exit.
2. You may be in the other vehicle’s blind spot.
3. You may block the driver's view.
4. It prevents other drivers from passing both of you.
You may be in the other vehicle’s blind spot.
When riding a motorcycle, a jacket should be worn:
1. No matter the weather conditions.
2. Only on cool days.
3. Only on warm days.
4. Only if the ride will be longer than half an hour.
1. No matter the weather conditions.
2. Only on cool days.
3. Only on warm days.
4. Only if the ride will be longer than half an hour.
No matter the weather conditions.
A group of riders should pass another vehicle:
1. In a staggered formation.
2. In a pyramid formation.
3. One at a time.
4. In a splintered formation.
1. In a staggered formation.
2. In a pyramid formation.
3. One at a time.
4. In a splintered formation.
One at a time.
If you think stopping your motorcycle will take longer than usual, you should:
1. Lengthen your following distance.
2. Shorten your following distance.
3. Leave the road.
4. Speed up.
1. Lengthen your following distance.
2. Shorten your following distance.
3. Leave the road.
4. Speed up.
Lengthen your following distance.
When being followed too closely by another vehicle, you should:
1. Speed up.
2. Move onto the shoulder.
3. Allow the other driver to pass you.
4. Exit the roadway.
1. Speed up.
2. Move onto the shoulder.
3. Allow the other driver to pass you.
4. Exit the roadway.
Allow the other driver to pass you.
When riding with a heavy load, you will want to adjust the:
1. Brakes.
2. Seat.
3. Suspension.
4. Brake light.
1. Brakes.
2. Seat.
3. Suspension.
4. Brake light.
Suspension.
If you are using an unfamiliar motorcycle, what should you do before riding?
1. Ride like you would on your bike, since all bikes are about the same.
2. Check the controls and shift pattern.
3. Take the owner’s word that everything is in working order.
4. Assume you know where all the controls are located.
1. Ride like you would on your bike, since all bikes are about the same.
2. Check the controls and shift pattern.
3. Take the owner’s word that everything is in working order.
4. Assume you know where all the controls are located.
Check the controls and shift pattern.
A pre-ride inspection should be done:'
1. Before every ride.
2. Once a week.
3. Once a month.
4. Once a season.
1. Before every ride.
2. Once a week.
3. Once a month.
4. Once a season.
Before every ride.
When passing another vehicle:'
1. You must complete the pass without exceeding the speed limit.
2. You may complete the pass in a no passing zone if the pass was started before the no passing zone began.
3. You may exceed the speed limit.
4. You should pass on the shoulder.
1. You must complete the pass without exceeding the speed limit.
2. You may complete the pass in a no passing zone if the pass was started before the no passing zone began.
3. You may exceed the speed limit.
4. You should pass on the shoulder.
You must complete the pass without exceeding the speed limit.
When preparing to pass another vehicle on the left, which portion of the lane should you ride in?
1. The left portion
2. The center portion
3. The right portion
4. The shoulder
1. The left portion
2. The center portion
3. The right portion
4. The shoulder
The left portion
Showing the first 10 terms. Use the flashcard player above to study all 25 terms!