2026 District Of Columbia DMV HazMat Endorsement Test 2 (30 Questions And Complete Answers)
1 / 30
Terms in this set
30
Shipping papers identifying hazardous materials should be:
1. At the bottom of a stack of shipping papers.
2. On the top of a stack of shipping papers.
3. In a location separate from non-hazardous materials.
4. Stored under the passenger’s seat.
1. At the bottom of a stack of shipping papers.
2. On the top of a stack of shipping papers.
3. In a location separate from non-hazardous materials.
4. Stored under the passenger’s seat.
On the top of a stack of shipping papers.
When loading hazardous materials, you should do all of the following, except:
1. Set the parking brake.
2. Load the materials away from heat.
3. Watch for signs of leakage.
4. Use a hook.
1. Set the parking brake.
2. Load the materials away from heat.
3. Watch for signs of leakage.
4. Use a hook.
Use a hook.
In the Hazardous Materials Table, Column 2 lists:
1. The names of materials.
2. Where materials originate.
3. Special provisions for materials.
4. Materials' manufacturers.
1. The names of materials.
2. Where materials originate.
3. Special provisions for materials.
4. Materials' manufacturers.
The names of materials.
If you apply for an original or renewal HazMat endorsement, you must undergo a background check through which agency?
1. Transportation Security Administration
2. Federal Bureau of Investigation
3. Central Intelligence Agency
4. Secretary of Defense
1. Transportation Security Administration
2. Federal Bureau of Investigation
3. Central Intelligence Agency
4. Secretary of Defense
Transportation Security Administration
To know which placards to use, you need to know:
1. The hazard classes of the materials.
2. The types of containers holding the materials.
3. The destination.
4. The shipper.
1. The hazard classes of the materials.
2. The types of containers holding the materials.
3. The destination.
4. The shipper.
The hazard classes of the materials.
Load hazardous materials:
1. Near heat sources.
2. Away from heat sources.
3. In direct sunlight.
4. In the rain.
1. Near heat sources.
2. Away from heat sources.
3. In direct sunlight.
4. In the rain.
Away from heat sources.
When transporting Division 1.1 materials, the floor liner should be:
1. Made from metallic materials.
2. Made from an iron alloy.
3. Made from non-ferrous materials.
4. Loose.
1. Made from metallic materials.
2. Made from an iron alloy.
3. Made from non-ferrous materials.
4. Loose.
Made from non-ferrous materials.
What must be included in emergency response information?
1. Risks of fire or explosion
2. Value of the materials
3. Driver information
4. Planned route
1. Risks of fire or explosion
2. Value of the materials
3. Driver information
4. Planned route
Risks of fire or explosion
Placards must be placed:
1. In any manner, as long as they are visible.
2. So words and numbers are read from left to right.
3. Upside down.
4. Within three inches of other markings.
1. In any manner, as long as they are visible.
2. So words and numbers are read from left to right.
3. Upside down.
4. Within three inches of other markings.
So words and numbers are read from left to right.
An improperly placarded vehicle can only be moved:
1. To make room for other vehicles.
2. During an emergency.
3. If the vehicle will be traveling a distance shorter than 10 miles.
4. To wash the vehicle.
1. To make room for other vehicles.
2. During an emergency.
3. If the vehicle will be traveling a distance shorter than 10 miles.
4. To wash the vehicle.
During an emergency.
Showing the first 10 terms. Use the flashcard player above to study all 30 terms!